325EXT took a dump

[Rambozo]

Well, you're right that I shouldn't poke at this thing too much as I don't have an in-depth electrical skill set. This just couldn't have happened at a worse time and while I really need a machine right now, the closest thing is a Dynasty or a Lincoln Aspect. Buying one of those means green is gone as they're both a HUGE investment. Never had a machine go down and man is it throwing me for a loop now.

Another option, depending on how big a pile of work you have backed up, is to rent a machine. I see one of the nationwide places rents what looks like a Dynasty 200 for $115 a week. Then you could get right to work, and figure out what you want to do when you have more time. I'm sure you will get your machine sorted out, but it will probably not happen quickly enough for your current situation.

[performance]

Actually the fact that the wiring is new could be a strong reason to check it out. It shouldn't take an extensive electrical skill set to check it out thoroughly as far as connections go (inside and out). It is worth trying first. You can give me a call later today or pm me your number and I will go over the basics with you.