Share
Results 1 to 3 of 3

Thread: FS: PowerTig 185 22K Foot Pedal - Brand New

  1. #1

    Default FS: PowerTig 185 22K Foot Pedal - Brand New

    Just recieved my PowerTig 185 today and to my surprise it came with a foot pedal. I had already ordered an SSC pedal so I have no use for this. Pedal is brand new / unused, 22K ohm.

    $75 shipped

  2. #2

    Default

    Before you sell it, if you ordered the SSC from us, make sure that someone did not make a substitute for the pedal. I'd keep it for back up anyway. The pedal is a decent pedal. The SSC is going to be a 47k pedal and won't work right if the new 185 came with a 22k.

  3. #3

    Default

    Mark,

    I called the Tech line again after getting off the phone with you. The tech again confirmed that the newer models take a 47K and the older models take a 22K. I hooked up my 47K SSC pedal and was able to get full amperage out of it, so it just looks like I was shipped the wrong pedal for my machine.

    No worries.

    Thank you.

Similar Threads

  1. PowerTig 250EX questions ---- foot pedal
    By 11Bravo in forum TIG Welding (GTAW/GTAW-P)
    Replies: 8
    Last Post: 09-07-2018, 02:53 AM
  2. 2015 Powertig 185 - Foot pedal pot size clarification
    By tiganis in forum TIG Welding (GTAW/GTAW-P)
    Replies: 4
    Last Post: 01-28-2016, 05:34 AM
  3. powertig 185 micro foot pedal???
    By hpipro4 in forum TIG Welding (GTAW/GTAW-P)
    Replies: 3
    Last Post: 10-13-2012, 04:35 AM
  4. PowerTig 185 and 250EX foot pedal
    By TD2593 in forum TIG Welding (GTAW/GTAW-P)
    Replies: 1
    Last Post: 01-13-2012, 11:50 PM
  5. Alternate foot pedal for PowerTig 225LX?
    By Zoomie in forum TIG Welding (GTAW/GTAW-P)
    Replies: 16
    Last Post: 03-09-2011, 01:58 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •