Share
Results 1 to 14 of 14

Thread: Welding table overhaul

  1. #1

    Default Welding table overhaul

    I decided to to a over haul on my welding table, right now it is 3'x6' and I'm gonna make it 3'x4' to gain some space back in the garage one section is 3/8" oiled and pickled plate the other part is a t-slot table from a big knee mill, I am going to incorporate the receiver style accessory ports and possibly cut slots in the plate like the jmr table. All I have done at this point is rough out the legs
    Click image for larger version. 

Name:	ImageUploadedByTapatalk1419806091.836961.jpg 
Views:	615 
Size:	12.2 KB 
ID:	12709Click image for larger version. 

Name:	ImageUploadedByTapatalk1419806104.635778.jpg 
Views:	578 
Size:	13.0 KB 
ID:	12710Click image for larger version. 

Name:	ImageUploadedByTapatalk1419806115.605516.jpg 
Views:	592 
Size:	12.7 KB 
ID:	12711Click image for larger version. 

Name:	ImageUploadedByTapatalk1419806125.604155.jpg 
Views:	548 
Size:	14.4 KB 
ID:	12712




    To make the legs I cut apart a 4x4 left over from a project


    Sent from my iPhone using Tapatalk
    Machines: EVERLAST Power Tig 210EXT w/ water cooler and 25' CS310 weldcraft torch
    LONGEVITY 250EX Tig
    MILLER 211 mig w/spool gun
    EVERLAST Power Plasma 80s mounted on my Torchmate 2x2 cnc table
    SMITHY 1324 mill/lathe
    60 gal. 7.5 hp air compressor


    MY YOUTUBE CHANNEL: https://www.youtube.com/user/dzljon/videos

  2. #2

    Default

    Leveling feet I am going to use
    Click image for larger version. 

Name:	ImageUploadedByTapatalk1419877451.126160.jpg 
Views:	458 
Size:	16.8 KB 
ID:	12714
    Click image for larger version. 

Name:	ImageUploadedByTapatalk1419877460.787957.jpg 
Views:	433 
Size:	16.9 KB 
ID:	12715
    Click image for larger version. 

Name:	ImageUploadedByTapatalk1419877470.985636.jpg 
Views:	454 
Size:	15.9 KB 
ID:	12716


    Sent from my iPhone using Tapatalk
    Machines: EVERLAST Power Tig 210EXT w/ water cooler and 25' CS310 weldcraft torch
    LONGEVITY 250EX Tig
    MILLER 211 mig w/spool gun
    EVERLAST Power Plasma 80s mounted on my Torchmate 2x2 cnc table
    SMITHY 1324 mill/lathe
    60 gal. 7.5 hp air compressor


    MY YOUTUBE CHANNEL: https://www.youtube.com/user/dzljon/videos

  3. #3

    Default

    Why not put it on locking casters so you can roll it out of the way when need be ?
    I use these 5" total locking ones on my welding table... 300lbs capacity each and cost about $7 when I bought them a few years ago. Weld a nut onto the backside of the mounting tab and you can level it with a washer if needed.
    Click image for larger version. 

Name:	IMG_1300.jpg 
Views:	463 
Size:	146.1 KB 
ID:	12726
    2013 250EX : SSC Pedal : I-MIG 250P 20' Profax gun : Power Plasma 60 p80 torch : 3M Speedglas 9100XX : Evolution Rage 3 DB cold saw

  4. #4

    Default

    Table progress
    Click image for larger version. 

Name:	ImageUploadedByTapatalk1420247549.929798.jpg 
Views:	452 
Size:	15.2 KB 
ID:	12742
    Click image for larger version. 

Name:	ImageUploadedByTapatalk1420247561.375678.jpg 
Views:	474 
Size:	17.5 KB 
ID:	12743
    Click image for larger version. 

Name:	ImageUploadedByTapatalk1420247573.656334.jpg 
Views:	456 
Size:	12.9 KB 
ID:	12744
    Click image for larger version. 

Name:	ImageUploadedByTapatalk1420247583.499408.jpg 
Views:	446 
Size:	13.7 KB 
ID:	12745
    Click image for larger version. 

Name:	ImageUploadedByTapatalk1420247594.256143.jpg 
Views:	481 
Size:	13.3 KB 
ID:	12746


    Sent from my iPhone using Tapatalk
    Machines: EVERLAST Power Tig 210EXT w/ water cooler and 25' CS310 weldcraft torch
    LONGEVITY 250EX Tig
    MILLER 211 mig w/spool gun
    EVERLAST Power Plasma 80s mounted on my Torchmate 2x2 cnc table
    SMITHY 1324 mill/lathe
    60 gal. 7.5 hp air compressor


    MY YOUTUBE CHANNEL: https://www.youtube.com/user/dzljon/videos

  5. #5

    Default

    Almost doneClick image for larger version. 

Name:	ImageUploadedByTapatalk1420477315.719592.jpg 
Views:	462 
Size:	15.9 KB 
ID:	12761
    Click image for larger version. 

Name:	ImageUploadedByTapatalk1420477345.279935.jpg 
Views:	465 
Size:	14.5 KB 
ID:	12762Click image for larger version. 

Name:	ImageUploadedByTapatalk1420477356.219294.jpg 
Views:	467 
Size:	14.5 KB 
ID:	12763
    Click image for larger version. 

Name:	ImageUploadedByTapatalk1420477367.554415.jpg 
Views:	507 
Size:	12.8 KB 
ID:	12764


    Sent from my iPhone using Tapatalk
    Machines: EVERLAST Power Tig 210EXT w/ water cooler and 25' CS310 weldcraft torch
    LONGEVITY 250EX Tig
    MILLER 211 mig w/spool gun
    EVERLAST Power Plasma 80s mounted on my Torchmate 2x2 cnc table
    SMITHY 1324 mill/lathe
    60 gal. 7.5 hp air compressor


    MY YOUTUBE CHANNEL: https://www.youtube.com/user/dzljon/videos

  6. #6

    Default

    Caster plates cut from 1/4"
    Click image for larger version. 

Name:	ImageUploadedByTapatalk1420477413.421567.jpg 
Views:	452 
Size:	10.7 KB 
ID:	12765
    Click image for larger version. 

Name:	ImageUploadedByTapatalk1420477426.636028.jpg 
Views:	461 
Size:	14.6 KB 
ID:	12766
    Click image for larger version. 

Name:	ImageUploadedByTapatalk1420477438.956911.jpg 
Views:	429 
Size:	13.4 KB 
ID:	12767
    Click image for larger version. 

Name:	ImageUploadedByTapatalk1420477454.616660.jpg 
Views:	443 
Size:	15.0 KB 
ID:	12768



    Sent from my iPhone using Tapatalk
    Machines: EVERLAST Power Tig 210EXT w/ water cooler and 25' CS310 weldcraft torch
    LONGEVITY 250EX Tig
    MILLER 211 mig w/spool gun
    EVERLAST Power Plasma 80s mounted on my Torchmate 2x2 cnc table
    SMITHY 1324 mill/lathe
    60 gal. 7.5 hp air compressor


    MY YOUTUBE CHANNEL: https://www.youtube.com/user/dzljon/videos

  7. #7

    Default

    Click image for larger version. 

Name:	ImageUploadedByTapatalk1420649603.073926.jpg 
Views:	467 
Size:	13.1 KB 
ID:	12771
    Click image for larger version. 

Name:	ImageUploadedByTapatalk1420649613.363232.jpg 
Views:	488 
Size:	13.1 KB 
ID:	12772
    Click image for larger version. 

Name:	ImageUploadedByTapatalk1420649623.817483.jpg 
Views:	420 
Size:	11.4 KB 
ID:	12773
    Click image for larger version. 

Name:	ImageUploadedByTapatalk1420649632.773910.jpg 
Views:	447 
Size:	12.6 KB 
ID:	12774
    Click image for larger version. 

Name:	ImageUploadedByTapatalk1420649641.288509.jpg 
Views:	483 
Size:	12.1 KB 
ID:	12775


    Sent from my iPhone using Tapatalk
    Machines: EVERLAST Power Tig 210EXT w/ water cooler and 25' CS310 weldcraft torch
    LONGEVITY 250EX Tig
    MILLER 211 mig w/spool gun
    EVERLAST Power Plasma 80s mounted on my Torchmate 2x2 cnc table
    SMITHY 1324 mill/lathe
    60 gal. 7.5 hp air compressor


    MY YOUTUBE CHANNEL: https://www.youtube.com/user/dzljon/videos

  8. #8

    Default

    Started building accessory ports
    Click image for larger version. 

Name:	ImageUploadedByTapatalk1420737113.977928.jpg 
Views:	460 
Size:	14.4 KB 
ID:	12776
    Click image for larger version. 

Name:	ImageUploadedByTapatalk1420737124.356796.jpg 
Views:	442 
Size:	15.3 KB 
ID:	12777
    Click image for larger version. 

Name:	ImageUploadedByTapatalk1420737133.845926.jpg 
Views:	470 
Size:	13.2 KB 
ID:	12778
    Click image for larger version. 

Name:	ImageUploadedByTapatalk1420737143.458762.jpg 
Views:	469 
Size:	14.5 KB 
ID:	12779


    Sent from my iPhone using Tapatalk
    Machines: EVERLAST Power Tig 210EXT w/ water cooler and 25' CS310 weldcraft torch
    LONGEVITY 250EX Tig
    MILLER 211 mig w/spool gun
    EVERLAST Power Plasma 80s mounted on my Torchmate 2x2 cnc table
    SMITHY 1324 mill/lathe
    60 gal. 7.5 hp air compressor


    MY YOUTUBE CHANNEL: https://www.youtube.com/user/dzljon/videos

  9. #9

    Default Welding table overhaul

    Vise mount
    Click image for larger version. 

Name:	ImageUploadedByTapatalk1420941132.778219.jpg 
Views:	453 
Size:	13.9 KB 
ID:	12780

    Made the vise greasable
    Click image for larger version. 

Name:	ImageUploadedByTapatalk1420941141.458912.jpg 
Views:	435 
Size:	13.4 KB 
ID:	12781


    Sent from my iPhone using Tapatalk
    Machines: EVERLAST Power Tig 210EXT w/ water cooler and 25' CS310 weldcraft torch
    LONGEVITY 250EX Tig
    MILLER 211 mig w/spool gun
    EVERLAST Power Plasma 80s mounted on my Torchmate 2x2 cnc table
    SMITHY 1324 mill/lathe
    60 gal. 7.5 hp air compressor


    MY YOUTUBE CHANNEL: https://www.youtube.com/user/dzljon/videos

  10. #10

    Default

    The two most important days in your life are the day you are born and the day you find out why.
    Mark Twain




    Sent from my iPhone using Tapatalk
    Machines: EVERLAST Power Tig 210EXT w/ water cooler and 25' CS310 weldcraft torch
    LONGEVITY 250EX Tig
    MILLER 211 mig w/spool gun
    EVERLAST Power Plasma 80s mounted on my Torchmate 2x2 cnc table
    SMITHY 1324 mill/lathe
    60 gal. 7.5 hp air compressor


    MY YOUTUBE CHANNEL: https://www.youtube.com/user/dzljon/videos

  11. #11

    Default

    Made gussets for the vise mount
    Click image for larger version. 

Name:	ImageUploadedByTapatalk1421023128.589626.jpg 
Views:	464 
Size:	13.6 KB 
ID:	12788
    Click image for larger version. 

Name:	ImageUploadedByTapatalk1421023137.458801.jpg 
Views:	449 
Size:	13.2 KB 
ID:	12789


    Sent from my iPhone using Tapatalk
    Machines: EVERLAST Power Tig 210EXT w/ water cooler and 25' CS310 weldcraft torch
    LONGEVITY 250EX Tig
    MILLER 211 mig w/spool gun
    EVERLAST Power Plasma 80s mounted on my Torchmate 2x2 cnc table
    SMITHY 1324 mill/lathe
    60 gal. 7.5 hp air compressor


    MY YOUTUBE CHANNEL: https://www.youtube.com/user/dzljon/videos

  12. #12

    Default

    Picked up aluminum diamond plate for the lower shelf
    Click image for larger version. 

Name:	ImageUploadedByTapatalk1421421658.234113.jpg 
Views:	439 
Size:	10.7 KB 
ID:	12793


    Sent from my iPhone using Tapatalk
    Machines: EVERLAST Power Tig 210EXT w/ water cooler and 25' CS310 weldcraft torch
    LONGEVITY 250EX Tig
    MILLER 211 mig w/spool gun
    EVERLAST Power Plasma 80s mounted on my Torchmate 2x2 cnc table
    SMITHY 1324 mill/lathe
    60 gal. 7.5 hp air compressor


    MY YOUTUBE CHANNEL: https://www.youtube.com/user/dzljon/videos

  13. #13

    Default

    Table progress and added 4' led lights
    Click image for larger version. 

Name:	ImageUploadedByTapatalk1421545250.920438.jpg 
Views:	444 
Size:	12.2 KB 
ID:	12800
    Click image for larger version. 

Name:	ImageUploadedByTapatalk1421545262.985303.jpg 
Views:	448 
Size:	12.3 KB 
ID:	12801
    Click image for larger version. 

Name:	ImageUploadedByTapatalk1421545273.305609.jpg 
Views:	447 
Size:	13.0 KB 
ID:	12802
    Click image for larger version. 

Name:	ImageUploadedByTapatalk1421545287.872630.jpg 
Views:	433 
Size:	14.7 KB 
ID:	12803
    Click image for larger version. 

Name:	ImageUploadedByTapatalk1421545305.286004.jpg 
Views:	435 
Size:	14.6 KB 
ID:	12804


    Sent from my iPhone using Tapatalk
    Machines: EVERLAST Power Tig 210EXT w/ water cooler and 25' CS310 weldcraft torch
    LONGEVITY 250EX Tig
    MILLER 211 mig w/spool gun
    EVERLAST Power Plasma 80s mounted on my Torchmate 2x2 cnc table
    SMITHY 1324 mill/lathe
    60 gal. 7.5 hp air compressor


    MY YOUTUBE CHANNEL: https://www.youtube.com/user/dzljon/videos

  14. #14

    Default

    Goofing around with picture features
    Click image for larger version. 

Name:	ImageUploadedByTapatalk1422113012.934122.jpg 
Views:	429 
Size:	12.3 KB 
ID:	12829
    Click image for larger version. 

Name:	ImageUploadedByTapatalk1422113024.909426.jpg 
Views:	431 
Size:	12.9 KB 
ID:	12830


    Sent from my iPhone using Tapatalk
    Machines: EVERLAST Power Tig 210EXT w/ water cooler and 25' CS310 weldcraft torch
    LONGEVITY 250EX Tig
    MILLER 211 mig w/spool gun
    EVERLAST Power Plasma 80s mounted on my Torchmate 2x2 cnc table
    SMITHY 1324 mill/lathe
    60 gal. 7.5 hp air compressor


    MY YOUTUBE CHANNEL: https://www.youtube.com/user/dzljon/videos

Similar Threads

  1. Tig Welding Table
    By knock10090 in forum TIG Welding (GTAW/GTAW-P)
    Replies: 9
    Last Post: 02-22-2015, 04:17 AM
  2. Welding table
    By joshuab in forum Other Custom Fabrications
    Replies: 12
    Last Post: 02-26-2014, 01:30 PM
  3. New 4' x 6' Welding Table
    By Rafael in forum Other Custom Fabrications
    Replies: 16
    Last Post: 07-16-2013, 03:23 PM
  4. My Little Welding Table
    By RP62 in forum TIG Welding (GTAW/GTAW-P)
    Replies: 2
    Last Post: 03-06-2012, 01:58 PM
  5. Project 4 from I_Love_Plasma ~ Slab Carrier Overhaul
    By I_Love_Plasma in forum Heavy Equipment and Commercial Projects
    Replies: 0
    Last Post: 10-25-2011, 02:47 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •