I installed this in 2012 when I did the cummins engine conversion
Member
F250 air ride install
I installed this in 2012 when I did the cummins engine conversion
Machines: EVERLAST Power Tig 210EXT w/ water cooler and 25' CS310 weldcraft torch
LONGEVITY 250EX Tig
MILLER 211 mig w/spool gun
EVERLAST Power Plasma 80s mounted on my Torchmate 2x2 cnc table
SMITHY 1324 mill/lathe
60 gal. 7.5 hp air compressor
MY YOUTUBE CHANNEL: https://www.youtube.com/user/dzljon/videos
Member
Here is a shot of the cummins under the hood
Machines: EVERLAST Power Tig 210EXT w/ water cooler and 25' CS310 weldcraft torch
LONGEVITY 250EX Tig
MILLER 211 mig w/spool gun
EVERLAST Power Plasma 80s mounted on my Torchmate 2x2 cnc table
SMITHY 1324 mill/lathe
60 gal. 7.5 hp air compressor
MY YOUTUBE CHANNEL: https://www.youtube.com/user/dzljon/videos
Super Moderator
How do you like the air ride, did it turn out as expected ?
How much power is the engine making ? Is there an engine conversion kit or did you fab it all ? What transmission are you running ?
Links to my welding projects > : Spray Arc with the 250p : Coldsaw Stand : Welding Cart : Heavy Duty Rolling Shelf : Taller Bandsaw
2013 250EX : SSC Pedal : I-MIG 250P 20' Profax gun : Power Plasma 60 p80 torch : 3M Speedglas 9100XX : Evolution Rage 3 DB cold saw
Member
the ride is awsome, getting it dialed in it the hardest part for me. The engine is just over 400 hp and uses a variable turbo it took from a 2012 6.7 when the owner swapped it out, the exhaust brake functions when the throttle pedalis at 0% I am using the ford 4r100 trans, and I did fabricate everything but the trans adapterOriginally Posted by zoama
Machines: EVERLAST Power Tig 210EXT w/ water cooler and 25' CS310 weldcraft torch
LONGEVITY 250EX Tig
MILLER 211 mig w/spool gun
EVERLAST Power Plasma 80s mounted on my Torchmate 2x2 cnc table
SMITHY 1324 mill/lathe
60 gal. 7.5 hp air compressor
MY YOUTUBE CHANNEL: https://www.youtube.com/user/dzljon/videos
Posting Permissions
Reply With Quote