Share
Page 1 of 2 12 LastLast
Results 1 to 20 of 35

Thread: Cummins turbo mount

  1. #1

    Default Cummins turbo mount

    Needed to angle the turbo away from the blockClick image for larger version. 

Name:	image.jpg 
Views:	379 
Size:	148.1 KB 
ID:	12500Click image for larger version. 

Name:	image.jpg 
Views:	358 
Size:	147.5 KB 
ID:	12501Click image for larger version. 

Name:	image.jpg 
Views:	347 
Size:	145.5 KB 
ID:	12502Click image for larger version. 

Name:	image.jpg 
Views:	451 
Size:	145.4 KB 
ID:	12503Click image for larger version. 

Name:	image.jpg 
Views:	396 
Size:	147.8 KB 
ID:	12504
    Machines: EVERLAST Power Tig 210EXT w/ water cooler and 25' CS310 weldcraft torch
    LONGEVITY 250EX Tig
    MILLER 211 mig w/spool gun
    EVERLAST Power Plasma 80s mounted on my Torchmate 2x2 cnc table
    SMITHY 1324 mill/lathe
    60 gal. 7.5 hp air compressor


    MY YOUTUBE CHANNEL: https://www.youtube.com/user/dzljon/videos

  2. #2

    Default

    Test fit, looks like it will work
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	image.jpg 
Views:	361 
Size:	140.0 KB 
ID:	12505  
    Machines: EVERLAST Power Tig 210EXT w/ water cooler and 25' CS310 weldcraft torch
    LONGEVITY 250EX Tig
    MILLER 211 mig w/spool gun
    EVERLAST Power Plasma 80s mounted on my Torchmate 2x2 cnc table
    SMITHY 1324 mill/lathe
    60 gal. 7.5 hp air compressor


    MY YOUTUBE CHANNEL: https://www.youtube.com/user/dzljon/videos

  3. #3

    Default

    Almost done with the mount
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	image.jpg 
Views:	289 
Size:	143.6 KB 
ID:	12506   Click image for larger version. 

Name:	image.jpg 
Views:	296 
Size:	145.5 KB 
ID:	12507  
    Machines: EVERLAST Power Tig 210EXT w/ water cooler and 25' CS310 weldcraft torch
    LONGEVITY 250EX Tig
    MILLER 211 mig w/spool gun
    EVERLAST Power Plasma 80s mounted on my Torchmate 2x2 cnc table
    SMITHY 1324 mill/lathe
    60 gal. 7.5 hp air compressor


    MY YOUTUBE CHANNEL: https://www.youtube.com/user/dzljon/videos

  4. #4

    Default

    Test fit turbo
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	image.jpg 
Views:	366 
Size:	144.3 KB 
ID:	12510  
    Attached Images Attached Images  
    Machines: EVERLAST Power Tig 210EXT w/ water cooler and 25' CS310 weldcraft torch
    LONGEVITY 250EX Tig
    MILLER 211 mig w/spool gun
    EVERLAST Power Plasma 80s mounted on my Torchmate 2x2 cnc table
    SMITHY 1324 mill/lathe
    60 gal. 7.5 hp air compressor


    MY YOUTUBE CHANNEL: https://www.youtube.com/user/dzljon/videos

  5. #5

    Default

    Built with everlast equipment and I am happy with the quality of the part featured
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	image.jpg 
Views:	261 
Size:	145.4 KB 
ID:	12518   Click image for larger version. 

Name:	image.jpg 
Views:	258 
Size:	145.6 KB 
ID:	12519   Click image for larger version. 

Name:	image.jpg 
Views:	281 
Size:	144.3 KB 
ID:	12520  
    Machines: EVERLAST Power Tig 210EXT w/ water cooler and 25' CS310 weldcraft torch
    LONGEVITY 250EX Tig
    MILLER 211 mig w/spool gun
    EVERLAST Power Plasma 80s mounted on my Torchmate 2x2 cnc table
    SMITHY 1324 mill/lathe
    60 gal. 7.5 hp air compressor


    MY YOUTUBE CHANNEL: https://www.youtube.com/user/dzljon/videos

  6. #6

    Default

    Mount is all done
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	image.jpg 
Views:	248 
Size:	151.9 KB 
ID:	12527   Click image for larger version. 

Name:	image.jpg 
Views:	226 
Size:	136.3 KB 
ID:	12528   Click image for larger version. 

Name:	image.jpg 
Views:	236 
Size:	137.6 KB 
ID:	12529   Click image for larger version. 

Name:	image.jpg 
Views:	233 
Size:	140.8 KB 
ID:	12530  
    Machines: EVERLAST Power Tig 210EXT w/ water cooler and 25' CS310 weldcraft torch
    LONGEVITY 250EX Tig
    MILLER 211 mig w/spool gun
    EVERLAST Power Plasma 80s mounted on my Torchmate 2x2 cnc table
    SMITHY 1324 mill/lathe
    60 gal. 7.5 hp air compressor


    MY YOUTUBE CHANNEL: https://www.youtube.com/user/dzljon/videos

  7. #7

    Default

    Installed a new oil drain for the new configuration
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	image.jpg 
Views:	236 
Size:	143.1 KB 
ID:	12543   Click image for larger version. 

Name:	image.jpg 
Views:	244 
Size:	143.2 KB 
ID:	12544  
    Machines: EVERLAST Power Tig 210EXT w/ water cooler and 25' CS310 weldcraft torch
    LONGEVITY 250EX Tig
    MILLER 211 mig w/spool gun
    EVERLAST Power Plasma 80s mounted on my Torchmate 2x2 cnc table
    SMITHY 1324 mill/lathe
    60 gal. 7.5 hp air compressor


    MY YOUTUBE CHANNEL: https://www.youtube.com/user/dzljon/videos

  8. #8

    Default

    Do you have room for the oil filter ?
    2013 250EX : SSC Pedal : I-MIG 250P 20' Profax gun : Power Plasma 60 p80 torch : 3M Speedglas 9100XX : Evolution Rage 3 DB cold saw

  9. #9

    Default

    New part on the way to install a remote oil filter
    Machines: EVERLAST Power Tig 210EXT w/ water cooler and 25' CS310 weldcraft torch
    LONGEVITY 250EX Tig
    MILLER 211 mig w/spool gun
    EVERLAST Power Plasma 80s mounted on my Torchmate 2x2 cnc table
    SMITHY 1324 mill/lathe
    60 gal. 7.5 hp air compressor


    MY YOUTUBE CHANNEL: https://www.youtube.com/user/dzljon/videos

  10. #10

    Default

    Quote Originally Posted by dzljon View Post
    New part on the way to install a remote oil filter
    It'll stay cleaner without oil running down the side of the block when the filter is changed. Fumoto oil drain valves are nice too. I even have one on my lawnmower.
    2013 250EX : SSC Pedal : I-MIG 250P 20' Profax gun : Power Plasma 60 p80 torch : 3M Speedglas 9100XX : Evolution Rage 3 DB cold saw

  11. #11

    Default Cummins turbo mount

    Any ideas on a good remote oil filter
    Machines: EVERLAST Power Tig 210EXT w/ water cooler and 25' CS310 weldcraft torch
    LONGEVITY 250EX Tig
    MILLER 211 mig w/spool gun
    EVERLAST Power Plasma 80s mounted on my Torchmate 2x2 cnc table
    SMITHY 1324 mill/lathe
    60 gal. 7.5 hp air compressor


    MY YOUTUBE CHANNEL: https://www.youtube.com/user/dzljon/videos

  12. #12

    Default

    Machines: EVERLAST Power Tig 210EXT w/ water cooler and 25' CS310 weldcraft torch
    LONGEVITY 250EX Tig
    MILLER 211 mig w/spool gun
    EVERLAST Power Plasma 80s mounted on my Torchmate 2x2 cnc table
    SMITHY 1324 mill/lathe
    60 gal. 7.5 hp air compressor


    MY YOUTUBE CHANNEL: https://www.youtube.com/user/dzljon/videos

  13. #13

    Default

    Part to relocate the oil filter showed up todayClick image for larger version. 

Name:	ImageUploadedByTapatalk1416878984.250332.jpg 
Views:	243 
Size:	8.8 KB 
ID:	12566
    Machines: EVERLAST Power Tig 210EXT w/ water cooler and 25' CS310 weldcraft torch
    LONGEVITY 250EX Tig
    MILLER 211 mig w/spool gun
    EVERLAST Power Plasma 80s mounted on my Torchmate 2x2 cnc table
    SMITHY 1324 mill/lathe
    60 gal. 7.5 hp air compressor


    MY YOUTUBE CHANNEL: https://www.youtube.com/user/dzljon/videos

  14. #14

    Default

    New oil cooler cover fits perfectlyClick image for larger version. 

Name:	ImageUploadedByTapatalk1416958572.366972.jpg 
Views:	221 
Size:	16.0 KB 
ID:	12578Click image for larger version. 

Name:	ImageUploadedByTapatalk1416958582.065742.jpg 
Views:	217 
Size:	13.2 KB 
ID:	12579Click image for larger version. 

Name:	ImageUploadedByTapatalk1416958591.962910.jpg 
Views:	235 
Size:	11.8 KB 
ID:	12580
    Machines: EVERLAST Power Tig 210EXT w/ water cooler and 25' CS310 weldcraft torch
    LONGEVITY 250EX Tig
    MILLER 211 mig w/spool gun
    EVERLAST Power Plasma 80s mounted on my Torchmate 2x2 cnc table
    SMITHY 1324 mill/lathe
    60 gal. 7.5 hp air compressor


    MY YOUTUBE CHANNEL: https://www.youtube.com/user/dzljon/videos

  15. #15

    Default

    New fitting for the remote oil filter
    Click image for larger version. 

Name:	ImageUploadedByTapatalk1417471131.883123.jpg 
Views:	199 
Size:	16.5 KB 
ID:	12620
    Click image for larger version. 

Name:	ImageUploadedByTapatalk1417471145.988060.jpg 
Views:	196 
Size:	13.6 KB 
ID:	12621


    Sent from my iPhone using Tapatalk
    Machines: EVERLAST Power Tig 210EXT w/ water cooler and 25' CS310 weldcraft torch
    LONGEVITY 250EX Tig
    MILLER 211 mig w/spool gun
    EVERLAST Power Plasma 80s mounted on my Torchmate 2x2 cnc table
    SMITHY 1324 mill/lathe
    60 gal. 7.5 hp air compressor


    MY YOUTUBE CHANNEL: https://www.youtube.com/user/dzljon/videos

  16. #16

    Default

    How long til we hear it run ?
    2013 250EX : SSC Pedal : I-MIG 250P 20' Profax gun : Power Plasma 60 p80 torch : 3M Speedglas 9100XX : Evolution Rage 3 DB cold saw

  17. #17

    Default

    Waiting on pistons and still neef to design my motor mounts, and of course there is the issue of cash flow especially with xmas so it might be a few months
    Machines: EVERLAST Power Tig 210EXT w/ water cooler and 25' CS310 weldcraft torch
    LONGEVITY 250EX Tig
    MILLER 211 mig w/spool gun
    EVERLAST Power Plasma 80s mounted on my Torchmate 2x2 cnc table
    SMITHY 1324 mill/lathe
    60 gal. 7.5 hp air compressor


    MY YOUTUBE CHANNEL: https://www.youtube.com/user/dzljon/videos

  18. #18

    Default

    The jeep receiving the cummins
    Click image for larger version. 

Name:	ImageUploadedByTapatalk1417561834.500870.jpg 
Views:	191 
Size:	14.1 KB 
ID:	12622


    Sent from my iPhone using Tapatalk
    Machines: EVERLAST Power Tig 210EXT w/ water cooler and 25' CS310 weldcraft torch
    LONGEVITY 250EX Tig
    MILLER 211 mig w/spool gun
    EVERLAST Power Plasma 80s mounted on my Torchmate 2x2 cnc table
    SMITHY 1324 mill/lathe
    60 gal. 7.5 hp air compressor


    MY YOUTUBE CHANNEL: https://www.youtube.com/user/dzljon/videos

  19. #19

    Default

    Quote Originally Posted by dzljon View Post
    The jeep receiving the cummins
    Click image for larger version. 

Name:	ImageUploadedByTapatalk1417561834.500870.jpg 
Views:	191 
Size:	14.1 KB 
ID:	12622


    Sent from my iPhone using Tapatalk
    That'll be pretty nice but I think you're gonna need some sound deadening material.
    2013 250EX : SSC Pedal : I-MIG 250P 20' Profax gun : Power Plasma 60 p80 torch : 3M Speedglas 9100XX : Evolution Rage 3 DB cold saw

  20. #20
    Join Date
    May 2012
    Location
    Disneyland
    Posts
    2,661

    Default

    Quote Originally Posted by zoama View Post
    That'll be pretty nice but I think you're gonna need some sound deadening material.
    Or a really loud stereo?
    Long arc, short arc, heliarc and in-the-dark!

Similar Threads

  1. 4bt Cummins motor mounts
    By dzljon in forum Other Custom Fabrications
    Replies: 12
    Last Post: 08-31-2016, 06:14 AM
  2. York 210 mount
    By dzljon in forum On Road Fabrication
    Replies: 5
    Last Post: 10-04-2015, 05:08 PM
  3. Cummins exhaust manifold cut to fit
    By dzljon in forum TIG Welding (GTAW/GTAW-P)
    Replies: 13
    Last Post: 11-19-2014, 08:56 PM
  4. 1936 Ford Schoolbus with Cummins 5.9 NV4500
    By Tacoma747 in forum On Road Fabrication
    Replies: 21
    Last Post: 08-20-2013, 08:27 PM
  5. Jerry can mount
    By Krookz in forum Other Custom Fabrications
    Replies: 0
    Last Post: 03-03-2011, 12:06 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •