256 Initial review

[Tony_F]

Thought everyone might be interested, its rather lengthy...

http://www.kitcarinfo.com/welder/welder.htm

If you want the short version ....in a nutshell, overall my experience with Everlast and the machine has been very positive.

[haroldmulder]

Thanks for the write up look forward to hearing more of your thoughts as time goes by

[2rods]

Thanks for the write up look forward to hearing more of your thoughts as time goes by

[TiggyMiggy]

Thanks for the write up look forward to hearing more of your thoughts as time goes by

Thanks for the write up look forward to hearing more of your thoughts as time goes by

I was going to say the same thing, but they both said it first!

This is the tig I am looking at.

[geezer]

Thought everyone might be interested, its rather lengthy...

http://www.kitcarinfo.com/welder/welder.htm

Lengthy is one thing , unreadable is another, try posting it as a common .doc file, not everyone has the newer .docx format, especially the XP users.
.DOCX is another microsoft suck off to get us to abandon XP and fill their pockets with our cash.

[2rods]

[performance]

.docx isn't an issue with xp. Its an issue possibly with your version of word. Word 2007 should be fine...which works quite well with xp. I have XP and no problems.

[TiggyMiggy]

I could repost it with the op's permission

[everlastsupport]

I could not open it either, I still use Office 2003. There is free Microsoft add-on that will allow you to see it with older Word.