Share
Results 1 to 14 of 14

Thread: Yes, another welding cart........ :-)

  1. Default Yes, another welding cart........ :-)

    For my first post I would share some photos of my first project using my new 250EX. So far I am loving this welder. Compared to my old Syncrowave 250 it feels like cheating.

    I have included both pre and post powder coating pics.

    The 110 volt outlet box on the back has a solid state relay inside that is triggered by the 220 volt output of the welder. That way I can have my Coolmate 3 (110 volt) come on when I switch on the welder. I thought this would be cheap insurance against forgetting to turn on the cooler and destroying a torch and cables. If anyone is interested in more details on the relay setup let me know.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Cart3.jpg 
Views:	570 
Size:	144.1 KB 
ID:	12317   Click image for larger version. 

Name:	Cart2.jpg 
Views:	574 
Size:	133.4 KB 
ID:	12316   Click image for larger version. 

Name:	Cart1.jpg 
Views:	553 
Size:	143.9 KB 
ID:	12315   Click image for larger version. 

Name:	Cart4.jpg 
Views:	528 
Size:	18.7 KB 
ID:	12318   Click image for larger version. 

Name:	Cart5.jpg 
Views:	510 
Size:	10.5 KB 
ID:	12319  

    Click image for larger version. 

Name:	Cart6.jpg 
Views:	510 
Size:	19.6 KB 
ID:	12320   Click image for larger version. 

Name:	Cart7.jpg 
Views:	540 
Size:	15.8 KB 
ID:	12321   Click image for larger version. 

Name:	Cart8.jpg 
Views:	514 
Size:	9.5 KB 
ID:	12322   Click image for larger version. 

Name:	Cart9.jpg 
Views:	513 
Size:	11.5 KB 
ID:	12323   Click image for larger version. 

Name:	Cart10.jpg 
Views:	518 
Size:	139.7 KB 
ID:	12324  

    Click image for larger version. 

Name:	Cart12.jpg 
Views:	507 
Size:	10.2 KB 
ID:	12325   Click image for larger version. 

Name:	Cart14.jpg 
Views:	526 
Size:	16.7 KB 
ID:	12326   Click image for larger version. 

Name:	Cart15.jpg 
Views:	545 
Size:	9.7 KB 
ID:	12327   Click image for larger version. 

Name:	Cart16.jpg 
Views:	567 
Size:	152.2 KB 
ID:	12328   Click image for larger version. 

Name:	Cart17.jpg 
Views:	684 
Size:	141.3 KB 
ID:	12329  

    Click image for larger version. 

Name:	Cart18.jpg 
Views:	563 
Size:	16.1 KB 
ID:	12330  

  2. #2

    Default

    Very nice. Though out and nothing to fail there. And powder coat. Man... What are your plans for the next project or what do you plan to use the 250EX for. Great machine BTW.
    Mike R.
    Email: admineverlast@everlastwelders.com
    www.everlastgenerators.com
    www.everlastwelders.com
    877-755-9353 x203
    M-F 12 - 7PM PST
    FYI: PP50, PP80, IMIG-200, IMIG-250P, 210EXT and 255EXT.

  3. Default

    Thanks for the positive comments. I spent quite a while deciding what I needed/wanted and even more time cutting and welding. It was great practice and I am really happy with the way it turned out. I learned a lot about how much everything "moves" when you go from tack welding to finishing the beads. Keeping it all square was a challenge. The powder coating shop I used did a great job. I will be using them again.

    I don't really have the next big project planned yet. I have a background in machining and normally just cut everything out of a billet. I wanted to expand my skills and teach myself how to TIG. So far it is going pretty well. The 250EX is working better than I had expected and the build quality (inside and out) exceeded my expectations.

  4. Default

    Nice. I wish I had more time for this kind of project. Judging from your screen name I am guessing A&P or pilot?

  5. Default

    I am a helicopter pilot (the screen name was cut short), but only for fun. I built an experimental turbine powered helicopter a few years ago and fly that when the weather is good. Click image for larger version. 

Name:	IMG_1518.jpg 
Views:	484 
Size:	108.6 KB 
ID:	12332Click image for larger version. 

Name:	IMG_0842.jpg 
Views:	434 
Size:	141.0 KB 
ID:	12333

  6. #6
    Join Date
    Oct 2012
    Location
    Canada, Suttonwest, Ontario
    Posts
    676

    Default

    What turbine engine did you put in the chopper.
    Everlast PowerTig 325EXT (Canada)
    Everlast Power I Mig 250 (Canada)
    Everlast PowerPlasma 80S (Canada)
    Everlast PowerCool W300 (Canada)
    Everlast PowerMTS 250S Fitted with a 30A Spoolgun(Canada)
    Miller Dynasty 400 wireless(Canada)
    Millermatic 252 plus 30A Spoolgun(Canada)

  7. Default

    It is a modified (custom gearbox housing) Solar T62-32 (160 hp)
    http://www.avonaero.com/solar32.htm

  8. Default

    Here is a picture of the solid state relay that is inside the 110 volt outlet. Click image for larger version. 

Name:	SSR.jpg 
Views:	424 
Size:	30.6 KB 
ID:	12336

  9. #9

    Default

    I love helicopters. I wanted to work on them when I joined the US Army 30 something years ago, but ended up a photographer. One of my sons was a helicopter mechanic in the USMC.
    Please tell us all about your machine or link to the info if available.
    2013 250EX : SSC Pedal : I-MIG 250P 20' Profax gun : Power Plasma 60 p80 torch : 3M Speedglas 9100XX : Evolution Rage 3 DB cold saw

  10. #10

    Default

    Quote Originally Posted by Turbinecopte View Post
    Here is a picture of the solid state relay that is inside the 110 volt outlet. Click image for larger version. 

Name:	SSR.jpg 
Views:	424 
Size:	30.6 KB 
ID:	12336
    I buy a lot from mpja.com a surplus place. Tyco is a good brand.
    Mike R.
    Email: admineverlast@everlastwelders.com
    www.everlastgenerators.com
    www.everlastwelders.com
    877-755-9353 x203
    M-F 12 - 7PM PST
    FYI: PP50, PP80, IMIG-200, IMIG-250P, 210EXT and 255EXT.

  11. Default

    Very cool! My last job was selling M250 engines for Rolls-Royce used in many a Bell Jet Ranger. Before that I was an integration engineer for them so I can tell you there is some serious work to get that machine to fly most don't ever get past the drawing board. Nice job.

  12. Default

    Quote Originally Posted by everlastsupport View Post
    I buy a lot from mpja.com a surplus place. Tyco is a good brand.
    Mike, I would have preferred to be able to plug the cooler directly into the back of the welder. I thought this was a pretty good compromise. The SSR should draw well below the max amp rating of the 220 volt outlet on the machine.

  13. #13
    Join Date
    Oct 2012
    Location
    Canada, Suttonwest, Ontario
    Posts
    676

    Default

    Quote Originally Posted by zoama View Post
    I love helicopters. I wanted to work on them when I joined the US Army 30 something years ago, but ended up a photographer. One of my sons was a helicopter mechanic in the USMC.
    Please tell us all about your machine or link to the info if available.
    Zoama
    My first job was welding frames on Bell G54's same as MASH on TV. Work on them at -40 deg. no fun work for 4 year was in one crash came out not to badly then I quit after 3 died in a G54 the blade weight came out of the end it was the day it was going with them for a test ride I was late for work I hit a duck and it just about knock me off my motorcycle I sat down for a while to get my breath and check the bike over before heading down the road slowly, it was my lucky day or I would not be right this. I still fly in them my neighbor owns National Helicopter I make parts for him on and off.
    Last edited by Kempy; 08-25-2014 at 12:25 AM.
    Everlast PowerTig 325EXT (Canada)
    Everlast Power I Mig 250 (Canada)
    Everlast PowerPlasma 80S (Canada)
    Everlast PowerCool W300 (Canada)
    Everlast PowerMTS 250S Fitted with a 30A Spoolgun(Canada)
    Miller Dynasty 400 wireless(Canada)
    Millermatic 252 plus 30A Spoolgun(Canada)

  14. Default

    For those with clearance issues between the argon inlet on the back of the machine and the bottle I had good luck with the AW-407 adapter
    Click image for larger version. 

Name:	photo 1.jpg 
Views:	482 
Size:	126.2 KB 
ID:	12338
    Click image for larger version. 

Name:	photo 2.jpg 
Views:	485 
Size:	142.2 KB 
ID:	12339

Similar Threads

  1. Welding Cart - Power Cart 250 - opinions?
    By ScottRussell in forum Multi-Process Units (TIG,Stick,Plasma/MIG,TIG,Stick Combo units)
    Replies: 3
    Last Post: 12-05-2012, 02:19 PM
  2. another another welding cart
    By ogorir in forum Other Custom Fabrications
    Replies: 18
    Last Post: 10-14-2011, 03:49 AM
  3. First Welding Project - You guessed it... a welding cart
    By EmptyNester in forum Hobyist Projects
    Replies: 19
    Last Post: 10-12-2011, 04:30 PM
  4. Welding cart
    By jtybt in forum General Welder Questions
    Replies: 1
    Last Post: 01-23-2010, 07:37 PM
  5. Welding cart
    By Titan winch in forum Other Custom Fabrications
    Replies: 13
    Last Post: 01-03-2010, 03:50 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •