Which TIG to buy?

[Blaster]

I have the PP256.

This Winter my project was to weld a dozen Aluminum Fireworks Finale pods out of 2" angle 1/4" thick, 1" Square 1/8" thick, and 1/8th & 1/4" Flat Stock. There are 200-300 welds ea. (consuming 6 300ltr Argon bottles) and 1/3 of them the 1/4" and required the Full 250A from the machine. Worked like a charm....

Don't let anybody tell you the machine's not up to it!

[performance]

...And I am simply telling you what it is designed for...
Would you rather buy a unit that is designed for what it is used for or buy a unit based off of someone's experience when there are better solutions? You can look through the site for the 256 and see for yourself. I've never had a single person tell me they wished they'd bought a combination unit instead of individual units. But I have had many people tell me they'd wished they would have bought individual units over the combination unit.

I'd take a look at the 250EX if budget is your concern. IF you are going to be welding lots of thinner aluminum, then the 210EXT is your choice.

[mud99]

So I'm going over to the dark side, I am going to take a look at a used Dynasty 200DX today. After comparing the specs to the Everlast, the Dynasty looks like a piece of junk, but it comes with several tanks and a bunch of accessories and the price on this one is right if it isn't blown up.

[performance]

TEST it thoroughly first. Flog it for at least an hour. One board for a Miller will cost the price of the 250EX plus the labor. Warranties, just as ours, do not transfer with them either. Boards aren't typically fixable with them either with individually serviced parts...If it's a cheap price, and I'd assume so with the budget range you are talking about...It is either a "hot" item or one that has seen better days as it seems like a deal too good to be true (though not outside of the realm of possibility). The good thing about the newer Miller units, that I wished we did have is an "arc hours" timer. Check out the hours. See if you can access them. If it's an older unit, I don't know if it does.

[DaveO]

After comparing the specs to the Everlast, the Dynasty looks like a piece of junk, but it comes with several tanks and a bunch of accessories

Welcome to the forums, Mark!

You should always comparison shop to make the right decision... pretty sure the 210 EXT and 250 EX ship with two torches, and they all ship with an consumables starter pack. Since you've MIGged in the past you probably know about tank rental vs. ownership, and your LWS's policies about owner tanks. That varies widely from place to place. Just wanted to pass along the heads-up that your seller may not be the rightful owner of the bottles.

[zoama]

My vote is for a new 250EX then save up for a powerPlasma 50. I've owned the 256 and the 250.

[everlastsupport]

My vote is for a new 250EX then save up for a powerPlasma 50. I've owned the 256 and the 250.

100% spot on. I have the 255EXT, but miss the knobs. And the price is great.

[performance]

250EX comes with one torch, but the 255ext comes with two. Not sure about the new soon to be fully released 210EXT.