Some Exciting NEWS! PowerTIG 325 EXT NOW in 220V 1 and 3 phase. 480V too.

[Kempy]

No idea. Something must have happened.

Mark
I can see other pictures but not the ones I put on like any threads I have checked so fare see: (Thread: 30A fitted to MTS250S) or (Thread: Some Exciting NEWS! PowerTIG 325 EXT NOW in 220V 1 and 3 phase. 480V too) or (Thread: New website is open for prelaunch review) or (Thread: Welding aluminum with 255EXT) are just some of the threads I have put pictures on.

[cbmkr]

Same problem here with pictures, i also could not login for 2 days and now i can. ????????????????

[Kempy]

Same problem here with pictures, i also could not login for 2 days and now i can. ????????????????

I had the same problem too then when I got to log on it was all different the post were the first to last then the next day it went back to normal but all the pictures went for a __________?

[Kempy]

Just checked my Attachments: Posted by Kempy and from 03/16/2014 last one till 7/22/2014 yesterday are missing.

[performance]

Yeah sounds about right. They moved the site over from the old one which had been done improperly. Not sure of the cause of the glitches, but we have made them aware.

[Kempy]

Mark
I see all my pictures are back that was nice to see they found them.
Thanks

[everlastsupport]

I rebuild the photo indexes yesterday and it said the photos where gone. So I mailed Oleg who mailed the Web guys. I guess they put them back now since they are here now and were not yesterday.

[Kempy]

Used the new 325EXT in single phase 240V had to welded a boat with a crack 52 inches long just a little leak.

[DaveO]

a crack 52 inches long

Dang. How did you prep it?

[Kempy]

Dang. How did you prep it?

Grind all the paint off sand blast some of it and tack welded every six inches then weld it up on pulse weld used vice grips to hold it first before tacking it.