Originally Posted by
DaveO
I like the wedge idea to prevent the bounce around. Looks like it tightens via the hex nut at the outside end of the receiver tube, smart idea.
BTW What is being sprayed?
Yes, that is just a long 1/2" bolt. The wedge part can be made from the piece you cut off with a nut welded on, or in this case I made it from a piece of 1" solid square, so that I could have a portion that fits inside the tubing and it keeps it from flopping around, when removed.
Typically this is used for various kinds of weed control. One is going on the back of a Kubota RTV900 and the other will be used on various trucks.
Long arc, short arc, heliarc and in-the-dark!
Reply With Quote