I'm back guys but a little frustrated! I have green electrodes 3/32x7 and i fried 2 and i dont know why. I don't have a stabilized arc, i damage a #6 ceramic cup, i tried differents settings, set to 20 LPM gas flow, etc. I read and reas and read about but i change settings, techniques and nothing good. My electrode tips melt and i dont know why. Is my green electrodes incorrect for welding aluminum? I can try with a blue electrodes... ;-)!
My setting for my everlast 180:
* AC (For aluminnum)
* 75 AMPs
* 50% AC Balance
* 120 AC frequency
* 4 post flow
Reply With Quote