Share
Results 1 to 5 of 5

Thread: MTS250S job SST table for potato peeler

  1. #1
    Join Date
    Oct 2012
    Location
    Canada, Suttonwest, Ontario
    Posts
    676

    Default MTS250S job SST table for potato peeler

    Another job for my MTS250S one more like that and my machine will have paid for its self then I will be make good money with it as a portable machine. I do use it in the shop also but I did by it as a portable machine over my 400 lbs. Hobart.

    My son took the pictures with his phone forgot my camera will go back some day and take them again. We had to take out a old wooden table with a galvanized top that fell apart after 27 years. the work was done in the basement with a 5 FT 6 inch head room the building was built in 1876 it is now a restaurant they wanted to fix the table by adding a table top from the kitchen when it was revamped. Got out my MTS250S and a small tank used the adapter I made to fit most anything to the dryer outlet and welded up the top to the other top added wall clips to hook under the splash lip to hold it to the block wall welded longer legs to the potato peeler they were very rusty cut the rusty part off and add some SST tube to it and plastic feet to sit on the floor.


    Click image for larger version. 

Name:	SST welding potato maching table 2.jpg 
Views:	226 
Size:	99.1 KB 
ID:	12019Click image for larger version. 

Name:	SST welding potato maching table 3.jpg 
Views:	226 
Size:	125.1 KB 
ID:	12020Click image for larger version. 

Name:	SST welding potato maching table.jpg 
Views:	225 
Size:	105.9 KB 
ID:	12021
    Everlast PowerTig 325EXT (Canada)
    Everlast Power I Mig 250 (Canada)
    Everlast PowerPlasma 80S (Canada)
    Everlast PowerCool W300 (Canada)
    Everlast PowerMTS 250S Fitted with a 30A Spoolgun(Canada)
    Miller Dynasty 400 wireless(Canada)
    Millermatic 252 plus 30A Spoolgun(Canada)

  2. #2

    Default

    Did you tig weld the lap joint ?
    2013 250EX : SSC Pedal : I-MIG 250P 20' Profax gun : Power Plasma 60 p80 torch : 3M Speedglas 9100XX : Evolution Rage 3 DB cold saw

  3. #3

    Default

    Looks Nice Kempy
    EverLast 140ST
    PowerPlasma 50
    No You Can't Use Them

  4. #4
    Join Date
    Oct 2012
    Location
    Canada, Suttonwest, Ontario
    Posts
    676

    Default

    Quote Originally Posted by zoama585 View Post
    Did you tig weld the lap joint ?
    Yes I did to stop the water from running under the two tables tops. Had to weld the vertical part where the big lip is and in the corner were the two meet.
    Last edited by Kempy; 04-20-2014 at 08:53 PM.
    Everlast PowerTig 325EXT (Canada)
    Everlast Power I Mig 250 (Canada)
    Everlast PowerPlasma 80S (Canada)
    Everlast PowerCool W300 (Canada)
    Everlast PowerMTS 250S Fitted with a 30A Spoolgun(Canada)
    Miller Dynasty 400 wireless(Canada)
    Millermatic 252 plus 30A Spoolgun(Canada)

  5. #5
    Join Date
    Oct 2012
    Location
    Canada, Suttonwest, Ontario
    Posts
    676

    Default

    This is the part I cut off and used part of the lip to extend the main part to fit to the other table.

    Click image for larger version. 

Name:	SST welding potato maching table 4.jpg 
Views:	189 
Size:	131.2 KB 
ID:	12028Click image for larger version. 

Name:	cut off part.jpg 
Views:	170 
Size:	145.5 KB 
ID:	12029
    Everlast PowerTig 325EXT (Canada)
    Everlast Power I Mig 250 (Canada)
    Everlast PowerPlasma 80S (Canada)
    Everlast PowerCool W300 (Canada)
    Everlast PowerMTS 250S Fitted with a 30A Spoolgun(Canada)
    Miller Dynasty 400 wireless(Canada)
    Millermatic 252 plus 30A Spoolgun(Canada)

Similar Threads

  1. 30A fitted to MTS250S
    By Kempy in forum Multi-Process Units (TIG,Stick,Plasma/MIG,TIG,Stick Combo units)
    Replies: 52
    Last Post: 07-12-2014, 01:21 PM
  2. how do you like your MTS250S and can you answer some questions
    By TheGary in forum MIG Welding (GMAW/GMAW-P/FCAW)
    Replies: 39
    Last Post: 05-05-2014, 11:21 PM
  3. Mig 25 Torch MTS250S
    By colddainhell in forum MIG Welding (GMAW/GMAW-P/FCAW)
    Replies: 4
    Last Post: 03-27-2014, 11:39 PM
  4. MTS250S Code 802 ??
    By Kempy in forum Multi-Process Units (TIG,Stick,Plasma/MIG,TIG,Stick Combo units)
    Replies: 63
    Last Post: 07-29-2013, 12:31 AM
  5. Project 1 from Bob wills, mean green contest, Potato layover
    By bobwills in forum Other Custom Fabrications
    Replies: 1
    Last Post: 04-22-2012, 02:09 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •