200dx loosing arc during weld on ac

[performance]

I guess I'm not following u , do mean this SSC pedal is a different pedal than the "upgraded" pedal that I got . if so do u sell the SSC and how much?

Absolutely. It isn't the SSC unless you paid abou 159.00 for it plus 15.00 shipping extra. There's still a big difference and you can't mistake the two. The SSC has a sanded top surface. It is wider and flatter than the current pedal.

[jeffcw30]

Absolutely. It isn't the SSC unless you paid abou 159.00 for it plus 15.00 shipping extra. There's still a big difference and you can't mistake the two. The SSC has a sanded top surface. It is wider and flatter than the current pedal.

Well I spent some time running more beads and it is still loooosing arc intermittently . so I guess my question remains is it the pedal and how to be sure?

[performance]

We've got several threads on checking the foot pedal. We also have a pinout posted on a sticky. Do you have a needle type volt/ohm meter or a digital one? (Needle type preferred). You can check the sweep of the pedal and make sure it is going from 0-47k and 47k-0 smoothly between pins 3 and 4 and 4 and 5.

[Rambozo]

Well I spent some time running more beads and it is still loooosing arc intermittently . so I guess my question remains is it the pedal and how to be sure?

One easy way is to switch to the torch switch and run some beads. If all is good, it is most likely a bad pot in the pedal. Does this happen with the pedal always in the same place in it's travel?

[jeffcw30]

One eproblem is to switch to the torch switch and run some beads. If all is good, it is most likely a bad pot in the pedal. Does this happen with the pedal always in the same place in it's travel?

I just ordered the SSC pedal I hope this will fix the problem. Oleg gave me a good deal . I will be sure to post results. I wanted to order a ck torch, left a message with mark a week ago because alex didn't have many details on them but haven't heard back yet. So far support has been good thanks Everlast.