Share
Results 1 to 6 of 6

Thread: PU205P plasma fitting

  1. Default PU205P plasma fitting

    PowerUltra205P plasma torch air hose fitting is blocked when torch dinse fitting is screwed in. See attached picture. Question - any quick fix, do I need to open cabinet and change position of fitting, etc? Will this void warranty? Simple fix, I don't mind, better than sending unit back. Or wrong dinse connector?Click image for larger version. 

Name:	plasma fitting.jpg 
Views:	180 
Size:	145.7 KB 
ID:	11981

  2. #2

    Default

    No, probably a slight machining burr on the inside, or it's not being fully locked in.

  3. Default

    Nope. Same amt of travel both dinse fittings. I spoke with Tech, suggested talk to Sales, possibly torch adapter wrong. Just trying to avoid opening the case and moving fitting.

  4. Default

    my pu205p is about a year old the plasma fitting never did fit tight but it works great anyhow

  5. Default

    Nah, fits tight, just rotates 180 degrees and stops in front of air quick disconnect. If Sales/Tech doesn't have an answer, I'll prob wind up opening case and turning female dinse fitting to where it won't obstruct air fitting. Just a minor PITA with a new machine

  6. #6

    Default

    Quote Originally Posted by ljdm1956 View Post
    Nah, fits tight, just rotates 180 degrees and stops in front of air quick disconnect. If Sales/Tech doesn't have an answer, I'll prob wind up opening case and turning female dinse fitting to where it won't obstruct air fitting. Just a minor PITA with a new machine
    On occasion one will get skewed a little when being locked down at the factory. I have experienced this myself on a unit. I did end up poping the cover and turning it (female dinse). Unit opens from the back if you go that direction.
    Mike R.
    Email: admineverlast@everlastwelders.com
    www.everlastgenerators.com
    www.everlastwelders.com
    877-755-9353 x203
    M-F 12 - 7PM PST
    FYI: PP50, PP80, IMIG-200, IMIG-250P, 210EXT and 255EXT.

Similar Threads

  1. New 325EXT gas fitting?
    By kumaichi in forum TIG Welding (GTAW/GTAW-P)
    Replies: 4
    Last Post: 07-24-2014, 12:02 PM
  2. OH: WTB Tig Torch set-up for PU205P
    By kenwhite in forum Buy, Sale or Trade
    Replies: 7
    Last Post: 01-25-2014, 01:10 PM
  3. Retro fitting a plasma cutter for a new torch - not Everlast
    By sticks in forum Everlast Plasma Cutters (PAC)
    Replies: 0
    Last Post: 08-10-2013, 11:27 AM
  4. PU205P Plasma Cutter
    By Tritium in forum Everlast Plasma Cutters (PAC)
    Replies: 1
    Last Post: 04-11-2012, 11:13 PM
  5. tig torch fitting
    By tjb406 in forum Multi-Process Units (TIG,Stick,Plasma/MIG,TIG,Stick Combo units)
    Replies: 11
    Last Post: 05-16-2010, 03:59 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •