Share
Results 1 to 10 of 10

Thread: Login time-out

  1. Default Login time-out

    Is there some reason why I only remain logged-in for a few seconds at a time? I can log in, open a thread, type a few words, and when I try to submit I'm already logged out. Seems awful short.

    Thanks, Neil

  2. #2
    Join Date
    Oct 2012
    Location
    Canada, Suttonwest, Ontario
    Posts
    676

    Default

    Neil I have had some problems to with the site can't get thing up and running very slow maybe they are switch thing to the new web site.
    Everlast PowerTig 325EXT (Canada)
    Everlast Power I Mig 250 (Canada)
    Everlast PowerPlasma 80S (Canada)
    Everlast PowerCool W300 (Canada)
    Everlast PowerMTS 250S Fitted with a 30A Spoolgun(Canada)
    Miller Dynasty 400 wireless(Canada)
    Millermatic 252 plus 30A Spoolgun(Canada)

  3. #3

    Default

    I stay logged in for hours on three computers? What browser are you using?
    Mike R.
    Email: admineverlast@everlastwelders.com
    www.everlastgenerators.com
    www.everlastwelders.com
    877-755-9353 x203
    M-F 12 - 7PM PST
    FYI: PP50, PP80, IMIG-200, IMIG-250P, 210EXT and 255EXT.

  4. #4
    Join Date
    Oct 2012
    Location
    Canada, Suttonwest, Ontario
    Posts
    676

    Default

    I am using IE 11 and Firefox 26.0 maybe it is at my end I will phone Bell and have them do a test on the line.
    Everlast PowerTig 325EXT (Canada)
    Everlast Power I Mig 250 (Canada)
    Everlast PowerPlasma 80S (Canada)
    Everlast PowerCool W300 (Canada)
    Everlast PowerMTS 250S Fitted with a 30A Spoolgun(Canada)
    Miller Dynasty 400 wireless(Canada)
    Millermatic 252 plus 30A Spoolgun(Canada)

  5. #5
    Join Date
    Oct 2012
    Location
    Canada, Suttonwest, Ontario
    Posts
    676

    Default

    Had Bell run a upload and download test and I did it also at my end now they said they fixed it, it is slow then ever now, phoned Bell again and now they are send a service tech out to check the lines and things so it is not at your end.
    Mike thanks for your input at your end, nice to know it was not the website.
    My download was .33 to .46 mbps and it should be 6.00 to 5.50 mbps.
    Everlast PowerTig 325EXT (Canada)
    Everlast Power I Mig 250 (Canada)
    Everlast PowerPlasma 80S (Canada)
    Everlast PowerCool W300 (Canada)
    Everlast PowerMTS 250S Fitted with a 30A Spoolgun(Canada)
    Miller Dynasty 400 wireless(Canada)
    Millermatic 252 plus 30A Spoolgun(Canada)

  6. #6

    Default

    Quote Originally Posted by Kempy View Post
    Had Bell run a upload and download test and I did it also at my end now they said they fixed it, it is slow then ever now, phoned Bell again and now they are send a service tech out to check the lines and things so it is not at your end.
    Mike thanks for your input at your end, nice to know it was not the website.
    My download was .33 to .46 mbps and it should be 6.00 to 5.50 mbps.
    ATT will cut corners if you do not keep an eye on them. The site is a little laggy, that is normal, but it should not have you re-login in minutes. Something is not right there.
    Mike R.
    Email: admineverlast@everlastwelders.com
    www.everlastgenerators.com
    www.everlastwelders.com
    877-755-9353 x203
    M-F 12 - 7PM PST
    FYI: PP50, PP80, IMIG-200, IMIG-250P, 210EXT and 255EXT.

  7. Default

    Quote Originally Posted by everlastsupport View Post
    I stay logged in for hours on three computers? What browser are you using?
    Mike - I'm running Firefox 27.0.1 and my download speed is around 8Mbs. I have no similar issue with any other forum, and the timeout seems to vary. Since re-logging takes so little time I will live with it. Just glad I don't lose the content I just typed!

    Neil

  8. #8
    Join Date
    Oct 2012
    Location
    Canada, Suttonwest, Ontario
    Posts
    676

    Default

    I just update Firefox to 27.0.1 and all is working got speed up to 5.3 Mbps and it is a lot faster Bell put filters on the line and it caused a problem they removed them and all is well for now. The tech told me to check line speed every two weeks using (speed test .net) and if it gets below 5.0 phone Bell.
    Everlast PowerTig 325EXT (Canada)
    Everlast Power I Mig 250 (Canada)
    Everlast PowerPlasma 80S (Canada)
    Everlast PowerCool W300 (Canada)
    Everlast PowerMTS 250S Fitted with a 30A Spoolgun(Canada)
    Miller Dynasty 400 wireless(Canada)
    Millermatic 252 plus 30A Spoolgun(Canada)

  9. #9
    Join Date
    Nov 2012
    Location
    Whine Country, California
    Posts
    442

    Default

    Quote Originally Posted by everlastsupport View Post
    ATT will cut corners if you do not keep an eye on them. The site is a little laggy, that is normal, but it should not have you re-login in minutes. Something is not right there.
    This has been my exact experience with ATT! I call up and complain about slow internet speed, explain that "Yes I tried other browsers", and "Yes, the other computers in the house perform the same way (slow!)", and "Yes, the phone service is messed up too at the same time the internet is acting up (since both use the same line)". They send a tech out, he calls from his truck 10 minutes before the appointment deadline, and asks me if I can get a ladder out and "swat" the incoming line with a broom stick handle (so he doesn't have to drive all the way out here and do actual work).

    I respond with "I don't happen to own a broomstick handle since all my extra handles have the broom attached to them...now don't forget to bring your ladder when you get here since the incoming line is about 20 feet off the ground!" The tech comes out, does very little, and then proceeds to tell me that even though I signed up for high speed internet and should be getting 12mbps during even the slowest periods, and the fact my connection continues to time me out or produce as low as .61mbps on a constant basis, their service connection is working perfectly. My issues are just due to high internet traffic (YEAH RIGHT!).

    We've only had one tech come out and do his job (replaced the original installers shabby work and then ordered some other techs out to have the slack in the line "taken up" after the garbage truck hit it and knocked it loose. The rest of the guys have been useless (I mean that in the good Christian way)!
    Andy
    New Everlast PowerTig 250EX that is begging for me to come up with a few welding projects so it can stretch it's legs. Did someone say aluminum???

    MISC. TOOLS:
    Atlas 618 lathe
    Milwaukee Porta Band with custom made stand
    Dewalt 4-1/2" angle grinder
    Dewalt 14" chop saw

    Strong Hand Nomad portable table
    Juki sewing machine I've had for years (yes I know sewing is for girls)

  10. Default

    I didn't see this covered earlier in the thread, but if you don't check the "Remember Me" box, it'll act like that.
    Jim

    Everlast PowerTig 255 EXT - Bugatti Veyron
    Everlast PowerTig 250 EXT - Sent home by Ricksha
    Everlast Power I-Mig 140E - Handy little helper
    Everlast PowerArc 140 ST - Rapid Response Unit
    Miller Syncrowave 250 - Old Ironsides - Sold
    Miller Maxstar 150 STH - Nice, nice, nice
    Miller Spectrum Thunder Plasma Cutter - Cute
    HyperTherm MAX43 Plasma Cutter - Good worker
    Lincoln PowerMig 255 - Workhorse shop Mig
    ReadyWelder Spoolgun - Great portable gun

Similar Threads

  1. Hard time
    By runon in forum TIG Welding (GTAW/GTAW-P)
    Replies: 14
    Last Post: 08-26-2016, 06:28 AM
  2. Is there a warm up time
    By dgbrit in forum TIG Welding (GTAW/GTAW-P)
    Replies: 7
    Last Post: 11-24-2013, 09:09 PM
  3. Training Time
    By Tensas in forum Introduce Yourself
    Replies: 10
    Last Post: 08-21-2013, 11:04 AM
  4. First time using gas lens...wow!
    By Ron66 in forum TIG Welding (GTAW/GTAW-P)
    Replies: 11
    Last Post: 09-22-2012, 02:08 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •