Something else you can put together with a 3 axis CNC system, and a MIG machine.
http://www.ibtimes.com/3d-printing-m...r-1500-1492114
Put some extra Z axis travel in that next CNC plasma table build.
Senior Member
3D Printing with MIG
Something else you can put together with a 3 axis CNC system, and a MIG machine.
http://www.ibtimes.com/3d-printing-m...r-1500-1492114
Put some extra Z axis travel in that next CNC plasma table build.
Long arc, short arc, heliarc and in-the-dark!
Senior Member
Uh oh... it's the next big step toward 3-D printing a handgun that the media hyped up, not long ago.
Have you seen any output from a MIG 3-D? I just looked for pictures and didn't see any.
DaveO
Oxweld oxy acet gear
IMIG 200
PowerTIG 210 EXT... Amazing!
Senior Member
That was done years ago with robotic manipulators. Using a 3d printer is pretty mickey mouse.
Everlast 200DX
Everlast PT185
Shoptask 3-in-1 (not currently in my garage, but I own it...)
Any day on a motorcycle like this that ends just needing parts and labor is a good day.
4.82, 158.67mph 1/8th mile 7.350, 200.35mph 1/4 mile
Senior Member
The Rostock they used for the demo was kinda cheesy, but any accurate XYZ CNC transport or robot would do the job. The smallest feature size wasn't too bad. I would guess they use .023 wire. They did print a chain sprocket that was functional, with the system.
Long arc, short arc, heliarc and in-the-dark!
Posting Permissions
Reply With Quote