Share
Results 1 to 8 of 8

Thread: OH: WTB Tig Torch set-up for PU205P

  1. #1

    Default OH: WTB Tig Torch set-up for PU205P

    Went to my storage area to get and use my PU205P and it appears someone has walked off TIG torch. Does anyone have one for sale shipped to 44077? Thanks,

    Ken
    __________________________
    Everlast Power I-MIG 200
    Everlast PowerUltra 205P
    Everlast SM 200-N
    Thermal Dynamics Cutmaster 42

  2. #2
    Join Date
    Oct 2010
    Location
    Northern Virginia
    Posts
    1,323

    Default

    Hey, Ken, haven't heard from you in a while! Welcome back.

    Sorry to hear you had a theft- if all they got was the torch, then it sounds like you got off light.
    DaveO
    Oxweld oxy acet gear
    IMIG 200
    PowerTIG 210 EXT... Amazing!

  3. #3
    Join Date
    Oct 2013
    Location
    Glendale Arizona
    Posts
    26

    Default

    Ken sorry to hear about this, nothing worse then a thief. I have a 26 torch setup that came with my PP205 that I'll part with. It was only used enough to make sure it works. It is a rigid 26 body with a denom zipper cover and torch switch. I'll set it up with a new 3/32 setup with a 6 cup, a ceriated tungsten ground but not used and a long and short back cap. Hows 75 bucks priority shipped to you.

  4. #4

    Default

    Quote Originally Posted by DaveO View Post
    Hey, Ken, haven't heard from you in a while! Welcome back.

    Sorry to hear you had a theft- if all they got was the torch, then it sounds like you got off light.
    Thanks, been busy with family issues and just finally starting to get back into my hobbies.
    __________________________
    Everlast Power I-MIG 200
    Everlast PowerUltra 205P
    Everlast SM 200-N
    Thermal Dynamics Cutmaster 42

  5. #5

    Default

    Quote Originally Posted by azsprint6 View Post
    Ken sorry to hear about this, nothing worse then a thief. I have a 26 torch setup that came with my PP205 that I'll part with. It was only used enough to make sure it works. It is a rigid 26 body with a denom zipper cover and torch switch. I'll set it up with a new 3/32 setup with a 6 cup, a ceriated tungsten ground but not used and a long and short back cap. Hows 75 bucks priority shipped to you.
    Thanks and I appreciate the offer. One of my coworkers says he has an old one that he will give me if he can find it. However, if it needs a bunch of modifications to make it work, it won't be worth the effort so I will get back with you. Yours should just plug right into my PU205P, correct?
    __________________________
    Everlast Power I-MIG 200
    Everlast PowerUltra 205P
    Everlast SM 200-N
    Thermal Dynamics Cutmaster 42

  6. #6

    Default

    ken,
    Just verify which pin diameter you have on the DINSE. I believe they could have changed. I am not in the main office so I dont get to see them often these days. Older units had 3/8". Newer unit could have 1/2"...though I am not 100% certain on that model.

  7. #7
    Join Date
    Oct 2013
    Location
    Glendale Arizona
    Posts
    26

    Default

    Not sure what size your machine accepts but my Dinse is the 1/2" 35-70 and the 7 pin connector is 15.5mm.

  8. #8

    Default

    My welder has a 3/8" Dinse connector so it may be better for me to just order through Everlast. Thanks Mark and everyone.

    Ken
    __________________________
    Everlast Power I-MIG 200
    Everlast PowerUltra 205P
    Everlast SM 200-N
    Thermal Dynamics Cutmaster 42

Similar Threads

  1. Floating head Machine Torch holder w/ S45 Machine Torch - 2 for sale.
    By countryguy in forum Everlast Plasma Cutters (PAC)
    Replies: 2
    Last Post: 12-19-2016, 10:52 PM
  2. PU205P plasma fitting
    By ljdm1956 in forum Multi-Process Units (TIG,Stick,Plasma/MIG,TIG,Stick Combo units)
    Replies: 5
    Last Post: 04-10-2014, 12:57 PM
  3. Change tig torch to a smaller water cooled torch
    By wheelrdealer in forum Multi-Process Units (TIG,Stick,Plasma/MIG,TIG,Stick Combo units)
    Replies: 4
    Last Post: 09-18-2012, 05:07 PM
  4. Model 26 Torch & General Torch Questions...
    By Ray C in forum TIG Welding (GTAW/GTAW-P)
    Replies: 14
    Last Post: 08-26-2012, 04:47 PM
  5. PU205P Plasma Cutter
    By Tritium in forum Everlast Plasma Cutters (PAC)
    Replies: 1
    Last Post: 04-12-2012, 12:13 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •