Share
Results 1 to 20 of 28

Thread: Brake Cleaner Phosgene Gas

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Jun 2011
    Location
    flordia tampa
    Posts
    16
    Blog Entries
    1

    Post

    phosphorc acid work ok to clean weld for painting.leaves white film ,wire wheel of.Newer anti spater sprays ok but all ways READ LABLE!!!! Plus get your heat treat # from steel vender you can get chemical copposition of material some times called MTR material test report.When welding STAINLES STEEL the crome turns in hexovalient crome very bad on nervis system.plus magnesium in weld rods can cause mag madness.Tungstion 2% thrioum is radio active. I spell like a little kid so bare with me

  2. #2
    Join Date
    Jun 2011
    Location
    flordia tampa
    Posts
    16
    Blog Entries
    1

    Default

    Quote Originally Posted by jojobead View Post
    phosphorc acid work ok to clean weld for painting.leaves white film ,wire wheel of.Newer anti spater sprays ok but all ways READ LABLE!!!! Plus get your heat treat # from steel vender you can get chemical copposition of material some times called MTR material test report.When welding STAINLES STEEL the crome turns in hexovalient crome very bad on nervis system.plus magnesium in weld rods can cause mag madness.Tungstion 2% thrioum is radio active. I spell like a little kid so bare with me
    phosphoric acid used on carbon steel

Similar Threads

  1. Tig welding with magnets around and aluminum cleaner
    By Steve in forum TIG Welding (GTAW/GTAW-P)
    Replies: 8
    Last Post: 08-05-2013, 07:21 PM
  2. MIG wire cleaner
    By Schuh in forum MIG Welding (GMAW/GMAW-P/FCAW)
    Replies: 6
    Last Post: 06-11-2013, 05:40 AM
  3. MIG wire cleaner
    By Schuh in forum Technical Bulletins and Tips
    Replies: 1
    Last Post: 06-09-2013, 01:44 AM
  4. "Ultra Bright Aluminum Cleaner" acid-based aluminum cleaner review
    By jakeru in forum General Welding Questions
    Replies: 4
    Last Post: 06-29-2011, 08:02 PM
  5. Press brake
    By Ram48 in forum Other Custom Fabrications
    Replies: 34
    Last Post: 03-28-2011, 03:55 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •