Quote Originally Posted by everlastsupport View Post
Hey Bill,

Welcome to the Everlast family.

What model did you go with? Also, look on craigslist for combos being sold (welder and tank). Sometime you get lucky. Swap the tank (if with a MIG) and sell off the welder. If not rent a large tank, it will save you money in the long run.
Hey Mike,
I got the little 140st. I have an area set up to fiddle with it over the winter in my basement. A booth with a "squire cage" blower unit from a furnace for exhaust with sheet metal sides and such. My main work area is unheated and looking at the temp right now it is 15 degrees out. I have a couple mig machines, arc and gas outfits waiting for warmer weather in my pole barn. Hoping to have a floor poured and some heat by next fall in a corner it to use in the future.

I have no real need for a tig but wanted to play with one. I have an argon set up that is borrowed to use with a spool gun on my mig set up but I have to get that back to the guy I borrowed it from. When I get my own I can then swap it back and forth between my mig spool set up and the tig machine. It will also be sweet to be able to have the little Everlast to use here and there with it's dual voltage option.
Thanks for the welcome!
Bill