Share
Results 1 to 2 of 2

Thread: my 250 EX stopped working

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Exclamation my 250 EX stopped working

    Was welding and the over current light came on only welding about 70 amp welding a fin back on a vw head. let machine run but light wont go out . took cover off just to see if something was loose everything looked good , only thing i can thing what ever kicks the over current on must be stuck , got my number 3 and 6 and 8 hammer plus duct tape ready to fix it and got a voo doo woman with a dead chicken to take hex off my welder .

  2. #2

    Default

    Rod,

    Rather posting, it is always better to call in and select tech support. This one will require a tech support call. It is 2AM (up sick with a cold), so I will not call you now. If I do not hear from you tomorrow, I will give you a call (and yes we take tech support calls on the weekend).
    Mike R.
    Email: admineverlast@everlastwelders.com
    www.everlastgenerators.com
    www.everlastwelders.com
    877-755-9353 x203
    M-F 12 - 7PM PST
    FYI: PP50, PP80, IMIG-200, IMIG-250P, 210EXT and 255EXT.

Similar Threads

  1. Plasma stopped working on PowerPro 205
    By mak in forum Multi-Process Units (TIG,Stick,Plasma/MIG,TIG,Stick Combo units)
    Replies: 12
    Last Post: 10-12-2020, 12:29 AM
  2. Power Ultra 205 HF start has stopped working
    By KC TB in forum Multi-Process Units (TIG,Stick,Plasma/MIG,TIG,Stick Combo units)
    Replies: 1
    Last Post: 02-02-2018, 03:14 AM
  3. Plasma on my PP256 stopped working
    By DeeEmm in forum Multi-Process Units (TIG,Stick,Plasma/MIG,TIG,Stick Combo units)
    Replies: 11
    Last Post: 07-08-2014, 12:18 PM
  4. PP256 Plasma stopped working
    By Andy in forum Multi-Process Units (TIG,Stick,Plasma/MIG,TIG,Stick Combo units)
    Replies: 10
    Last Post: 10-10-2013, 12:34 AM
  5. Pedal stopped working PP256
    By Timberwolf in forum Multi-Process Units (TIG,Stick,Plasma/MIG,TIG,Stick Combo units)
    Replies: 9
    Last Post: 06-08-2011, 04:42 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •