Share
Page 2 of 2 FirstFirst 12
Results 21 to 30 of 30

Thread: Bandsaw stand

  1. #21

    Default

    I take off the table but put the screws back in snug so not to loose them. I will be setting up a second one in the shed this weekend. Got a good deal on a second one. Only problem, they are small compared to the grizzly at the day time shop. But they work well. And mine does not track that great but better than a abrasive chop saw and no smoke/smell..

    I too upgraded the blade, use wax on it with a little cutting lube. I get a lot of cuts on the blades.
    Mike R.
    Email: admineverlast@everlastwelders.com
    www.everlastgenerators.com
    www.everlastwelders.com
    877-755-9353 x203
    M-F 12 - 7PM PST
    FYI: PP50, PP80, IMIG-200, IMIG-250P, 210EXT and 255EXT.

  2. #22

    Default

    It took a while to get this one dialed in but it tracks well now. Here's a cut to square up the end of some 1"x4" cold rolled that I made press plates from. Started at less than the blades width. Click image for larger version. 

Name:	IMG_1329.jpg 
Views:	175 
Size:	141.5 KB 
ID:	10394Click image for larger version. 

Name:	IMG_1332.jpg 
Views:	176 
Size:	135.8 KB 
ID:	10395Click image for larger version. 

Name:	IMG_1337.jpg 
Views:	173 
Size:	133.0 KB 
ID:	10396
    2013 250EX : SSC Pedal : I-MIG 250P 20' Profax gun : Power Plasma 60 p80 torch : 3M Speedglas 9100XX : Evolution Rage 3 DB cold saw

  3. #23
    Join Date
    May 2012
    Location
    Disneyland
    Posts
    2,661

    Default

    Quote Originally Posted by zoama585 View Post
    It took a while to get this one dialed in but it tracks well now. Here's a cut to square up the end of some 1"x4" cold rolled that I made press plates from. Started at less than the blades width.
    So where is the final picture showing how square the finished bar came out?
    Long arc, short arc, heliarc and in-the-dark!

  4. #24
    Join Date
    May 2012
    Location
    Disneyland
    Posts
    2,661

    Default

    Quote Originally Posted by joshuab View Post
    You know, I never thought about the ability to clamp a straightedge to the table. Usually when I'm operating vertical, I'm just trying to follow a line.

    The "four screws" might only be three. Two for the table itself and one for the angle-brace that supports it. You can get away without the brace, though, but two screws is still annoying.
    So add quick release bandsaw table to your never ending list of projects. Or do like Mike did and get two!
    Long arc, short arc, heliarc and in-the-dark!

  5. #25

    Default

    Quote Originally Posted by Rambozo View Post
    So where is the final picture showing how square the finished bar came out?
    I'll just have to go out to the shop and put a square on one.
    Last edited by zoama; 08-03-2013 at 01:13 PM.
    2013 250EX : SSC Pedal : I-MIG 250P 20' Profax gun : Power Plasma 60 p80 torch : 3M Speedglas 9100XX : Evolution Rage 3 DB cold saw

  6. #26

    Default

    Ok, I've taken about 30 pics trying to capture both edges with enough light to be clear.
    Keep clicking on this pic until it's at it's full size, then zoom in. (hold Ctrl key and mouse wheel forward for those who may not know) Click image for larger version. 

Name:	IMG_1465.jpg 
Views:	173 
Size:	145.8 KB 
ID:	10403 another angle Click image for larger version. 

Name:	IMG_1473.jpg 
Views:	166 
Size:	137.4 KB 
ID:	10404Name:  0020.gif
Views: 363
Size:  13.0 KB
    Last edited by zoama; 08-03-2013 at 01:23 PM.
    2013 250EX : SSC Pedal : I-MIG 250P 20' Profax gun : Power Plasma 60 p80 torch : 3M Speedglas 9100XX : Evolution Rage 3 DB cold saw

  7. #27
    Join Date
    May 2012
    Location
    Disneyland
    Posts
    2,661

    Default

    Looked pretty good, but now it seems to have vanished.
    Long arc, short arc, heliarc and in-the-dark!

  8. #28

    Default

    Quote Originally Posted by Rambozo View Post
    Looked pretty good, but now it seems to have vanished.
    I edited my reply to you, then decided to put it in a separate post and got my pics screwed up... all fixed now.
    2013 250EX : SSC Pedal : I-MIG 250P 20' Profax gun : Power Plasma 60 p80 torch : 3M Speedglas 9100XX : Evolution Rage 3 DB cold saw

  9. #29

    Default

    Quote Originally Posted by zoama585 View Post
    It took a while to get this one dialed in but it tracks well now. Here's a cut to square up the end of some 1"x4" cold rolled that I made press plates from. Started at less than the blades width. Click image for larger version. 

Name:	IMG_1329.jpg 
Views:	175 
Size:	141.5 KB 
ID:	10394Click image for larger version. 

Name:	IMG_1332.jpg 
Views:	176 
Size:	135.8 KB 
ID:	10395Click image for larger version. 

Name:	IMG_1337.jpg 
Views:	173 
Size:	133.0 KB 
ID:	10396
    What tpi are you using to cut stuff that thick?

  10. #30

    Default

    Quote Originally Posted by joshuab View Post
    What tpi are you using to cut stuff that thick?
    8-12 tpi vp bi-metal... I use the same blade for everything but I never cut anything thinner than 14ga. I leave the blade speed on it's fastest setting.
    2013 250EX : SSC Pedal : I-MIG 250P 20' Profax gun : Power Plasma 60 p80 torch : 3M Speedglas 9100XX : Evolution Rage 3 DB cold saw

Similar Threads

  1. Portable Horizontal Bandsaw
    By zedron in forum Tips & Tricks, Custom Tools, Safety, Ideas and Reviews.
    Replies: 7
    Last Post: 08-10-2013, 12:33 AM
  2. Bandsaw 45 degree cutting jig
    By joshuab in forum Other Custom Fabrications
    Replies: 0
    Last Post: 08-02-2013, 02:12 PM
  3. Bandsaw blade questions?
    By CGCINC in forum General Welding Questions
    Replies: 9
    Last Post: 11-05-2012, 01:44 PM
  4. TIG Welding Bandsaw Blades
    By jakeru in forum Heavy Equipment and Commercial Projects
    Replies: 1
    Last Post: 05-05-2011, 02:59 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •