I've been following Everlast...

[Trickle X]

Hello, I've been following Everlast for a while now and thought I would get on to the forum and say Hello. I am just a small part time fabricator making exhausts and manifolds for cars and bikes as well as some other parts. I do pretty much everything in house from raw material to finished product. I take pride in my work and try to do my very best on every job. I am looking to upgrade/supplement my Tig with a newer inverter power supply so I can do more Alu work. I am also looking in adding a plasma table, so looking at plasma machines as well. I posted two projects I did this past year and can post more projects if anyone is interested. I am located in Harrisburg, PA.

Thanks for taking the time to read my post.

Cole

[Mr120]

Hello, I've been following Everlast for a while now and thought I would get on to the forum and say Hello. I am just a small part time fabricator making exhausts and manifolds for cars and bikes as well as some other parts. I do pretty much everything in house from raw material to finished product. I take pride in my work and try to do my very best on every job. I am looking to upgrade/supplement my Tig with a newer inverter power supply so I can do more Alu work. I am also looking in adding a plasma table, so looking at plasma machines as well. I posted two projects I did this past year and can post more projects if anyone is interested. I am located in Harrisburg, PA.

Thanks for taking the time to read my post.

Cole

Welcome to the forum Cole. I can tell you put a lot into your work and I really enjoyed seeing the pictures of your projects. Keep em coming!

[geezer]

Welcome to the group,,,lot's of neat people here with knowledge on just about any subject,,,always room for another view on things..

[Trickle X]

Welcome to the group,,,lot's of neat people here with knowledge on just about any subject,,,always room for another view on things..

Thanks Geezer! I am always open for advice! I tend to be a good problem solver, whether or not it is the correct way is a different story...hahaha

[m j mauer]

Welcome to the forum.

[johnnymg]

Greetings and thanks for posting the pics/description of your "scooter" build. Very nice work!

cheers
JohnG

[Trickle X]

Thanks fellas!

[redbeard]

I tend to be a good problem solver, whether or not it is the correct way is a different story...hahaha

Exactly my wife's complaint about me!

And a belated welcome to the forum as well.