2013 Summer Time Contest. June 21- October 1 2013

[jameslo]

I'm in. This is #3

[breakneckmot]

Entering with post #2!

[joshuab]

Here is my entry post. It's not quite October 1 yet, but it's getting there...

Announce entry at post #5
http://www.everlastgenerators.com/fo...8327#post48327

Final submission post at post #178
http://www.everlastgenerators.com/fo...9867#post49867

Subscribe to Everlast YouTube channel. YouTube videos watched, liked, and commented.

http://www.youtube.com/watch?v=v53CB...=TLjp9hWzdDoUc
http://www.youtube.com/watch?v=bSvbA...=TLjp9hWzdDoUc
http://www.youtube.com/watch?v=urbT2...=TLjp9hWzdDoUc
http://www.youtube.com/watch?v=mXc2Z...=TLjp9hWzdDoUc
http://www.youtube.com/watch?v=j-fMMho0314
http://www.youtube.com/watch?v=lH37DCYGI1M
http://www.youtube.com/watch?v=8M8R_...=TLvSl_bWRqtF0

"Like" Everlast FB page. Like/Comment the following posts:

https://www.facebook.com/EVERLASTWEL...38336579565790
https://www.facebook.com/EVERLASTWEL...38335842899197
https://www.facebook.com/EVERLASTWEL...38332829566165
https://www.facebook.com/EVERLASTWEL...38332626232852
https://www.facebook.com/EVERLASTWEL...18359971563451
http://www.facebook.com/EVERLASTWELD...38337099565738

--- MINIMUM REQUIREMENTS FULFILLED ---

Project posts: (I realize that some of these might be too short to really be considered a "build post". In some cases, I didn't take a lot of photos, but I tried to do a good writeup anyway. I leave it to your judgement as to whether they are worth a point or not.)

http://www.everlastgenerators.com/fo...-Bandsaw-stand
http://www.everlastgenerators.com/fo...-Welding-table
http://www.everlastgenerators.com/fo...-for-PA160-STH
http://www.everlastgenerators.com/fo...ectrode-holder
http://www.everlastgenerators.com/fo...r-frame-repair

I propose that my "welding pedal mod box" post(s) count as a "shop tool welding project". It doesn't involve actually sticking metal together, but it's a shop tool, and it involves welding. Well, I'm just throwing it out. Your call.

http://www.everlastgenerators.com/fo...t-with-Arduino

Review on Amazon:
http://www.amazon.com/review/R1WO2ENBSERBTG/
http://www.amazon.com/review/R2FUVC8BBKB423
http://www.amazon.com/review/R1T7PUR2IDNCFC

Review on Weld.com:
http://www.weld.com/index.php/Weeken...pa160-sth.html

Reviews / Demonstrations on YouTube with post on Everlast Forum:
http://www.everlastgenerators.com/fo...8362#post48362
http://www.everlastgenerators.com/fo...8392#post48392
http://www.everlastgenerators.com/fo...put-adjustment

[DaveO]

I'll summarize now too: started at 866 posts; target count was 966; this should be post 1002.

Watched / liked / commented these 5 to qualify:
trailer build: http://www.youtube.com/watch?v=j-fMMho0314
plug welding: http://www.youtube.com/watch?v=QV41Ezrwm2c
185 welder: http://www.youtube.com/watch?v=ROc9g...09DMpnQ33r-j3A
hydration health: https://www.facebook.com/#!/EVERLASTWELDERS
ext 255: http://www.youtube.com/watch?v=RDq2_X3AgCo

Wrote these reviews:
http://www.amazon.com/Everlast-STICK...owViewpoints=0
http://weld.com/index.php/Weekend-Wa...g-210-ext.html

...so it looks like I'm in for 3. I *may* have a welding project in the next couple weeks, but it's not a shop tool per se, so I'll just post it when I get to it.

Good luck, everyone! It's been fun, as usual!