Purchase 250 EX

[Rocrat]

DaveO,
The Admiral and the Captain run the boat ,I'm just the lowly greaser and deck hand . I get banished to the shop to produce trick bits for the boat and am not allowed out for days . They throw chunks of 6 AL 4V titanium and bits of G10 and Delrin in then slam the door and expect miracles .

[Mr120]

DaveO,
The Admiral and the Captain run the boat ,I'm just the lowly greaser and deck hand . I get banished to the shop to produce trick bits for the boat and am not allowed out for days . They throw chunks of 6 AL 4V titanium and bits of G10 and Delrin in then slam the door and expect miracles .

Sounds a lot like Scotty from Star Trek! Still sounds like a great time will be had.

[The4th]

3 weeks ago Rocat. May 23rd I was charged. Sounds like Oleg has a whole boatload of tigs coming in. Im crossing my fingers my 250ex is in there. Trying to be patient without all the "Are they in yet, are they in yet?" but its not easy. I picked up an Argon bottle though, so hey ... I got that going for me.

[Rocrat]

4th I hear you , I have all the stuff I need from my fab shop , just no machine , so I feel your pain . I guess Everlasting could sell a bunch more machines if the had a continuous stock supply . It must be frustrating for Oleg and the rest of the crew not having a stockroom full of gear at hand . They have done a great job of promoting the gear and improving the product , but I am guessing the company is just not big enough to tie up a bunch of capital in stock , but I'm sure it's coming . I'm sure if they keep working at it they could sell as much as big Red or Blue , they certainly seem to have a good following .

[performance]

Rocrat... "Everlast" will preorder for you. We're usually shipping full blast, but yes, things do go out of stock. The customer can be put in front of the reception line when they are willing to pay and wait. Our facility is more than a "stock room". When we receive several hundred to several thousand units during a shipment, there's no way to tell movement, even from history or average sales figures...something will invariably go out of stock. We have plenty of MIGS and Stick welders on our hands right now, but things can change in a day...

[Rocrat]

Hey Mark,
Good to hear you guys are growing bigger , I have been lurking here for a couple years already and have seen the progress .
I put my order in on the 10th already , done and payed for ,250 EX , W300 ,SCC pedal and a couple torches , just hope I make the cut as I have watched you guys run out of stock rapidly as you say . I literally got a boat to catch haha

[Rambozo]

I literally got a boat to catch haha

And now you are literally waiting on a slow boat from China.

[Gman]

The day my ship came in, I was waiting on a train.

[Rocrat]

Got part of my order Friday , a direct shipment from SSC in Ohio the aftermarket pedal Everlast sells .
The pedal came well packaged .
Not sure how to link pic so I may attach one per reply

It comes with a hand drawn connection schematic

Good foot surface with grip tape surface for good traction

A textured rubber undersurface to stop the pedal sliding around

Not sure how the pedal comes apart to change out a worn pot.Looks like a type of rivet . Not like my Miller pedals that pull apart , but all up a good solid pedal

[zoama]

Up to 10 pics per post can be added at once... either repeating the upload procedure for each pic or highlighting up to 10 pics on your computer to upload at once.

[Rocrat]

Zo , thanks for that , not much of a forum poster

[The4th]

OK its official.. Im going nuts waiting for this welder. Four weeks in and no shipping is driving me nuts. COME ON WELDER IM PULLING FOR YA!

[Oleg]

OK its official.. Im going nuts waiting for this welder. Four weeks in and no shipping is driving me nuts. COME ON WELDER IM PULLING FOR YA!

units will me in port tomorrow .. should be shipping early in a week

[Odyknuck]

Any chance my 50P is in that container?

[Rocrat]

Keeping my fingers crossed

[The4th]

I know man, its hard to be on this end and have to dig up the information. He said early this week (I think that is what he said? early IN a week? I dont know.) I still dont have any shipping info. Oleg is the major reason I decided to go down this path. I really think he is leading the way in working hard to please the everlast customers and work on the reputation of the brand. Thats a major reason for me to purchase everlast products but this waiting for welders after payment without any way to know if your even in a cue or what is not a good thing.

[travis]

my 45 days is now like 63 and counting would really like some news on when it ships

[Oleg]

Guys ALL OK .. don't worry

container came in last Friday , customs should release it any day now
we're expecting to ship all no later than Friday

[youngnstudly]

Congrats on the purchase Rocrat! I'm envious and actually really tempted to place an order on a new AC/DC tig with pulse since Oleg has a shipment coming in. And the little yellow lab laying at my feet right now just HAD to get sick last week and cost $650 at the emergency vet!!! So far this year, she has cost over $2000 in vet bills (but whose counting, right?)! Money that could have been easily spent on a TIG welder AND a plasma cutter or small MIG!

Don't anybody hassle or tempt me, or I'll do it! I'll pull the trigger....Not on the dog, on the TIG purchase! Poor pup has it rough enough as it is! Eating, sleeping, and playing is tough work that not just anyone is qualified to do!

[travis]

hay iam all excited I got a tracking number today yippie