Changed Control Plug MTS250S

[Kempy]

The new 255ext will take different ohm pedals...but the connector will have to match. I am not sure, but the adapter idea IS the easiest solution. Looks like you have already opened up the welder to remove the female plug? You can get a couple of male/female connections online and easily make an adapter.

No I did not take it apart the picture is of the 250EX plug that I had to take out the Female pins for the HF was jumping across the pins that were not used. The new 250S has reversed the pins order on the plugs now Female on the machine and Male on the plugs.