my PowerPro 256S (2013)

[robt]

thanks for the heads up!

due to your advice and others having issue with the HF gap, I decided to pull the cover off my unit and take a peek, just to make sure everything was okay.

sure enough, the same clearance problem exists with the air regulator mount as last year (surely someone at Everlast knew about this?????)

they could move both holes down about 1.5cm and be okay (or maybe move the transformer forward some?)
the quickest fix would be to supply 2 shorter screws.










The HF gap is new and improved quite a bit from what I've seen in other pictures... this one shouldn't move at all
(located on the left side, front)

Just got my 256 this this month. Had the same issue with the filter screws being too long. I spaced them out and used them. Also , if you hook up the torch lines as per instructions, you will get cooler water come out your torch head.