I cleaned the inside as much as I could with a dremel, then I brushed on solar flux and welded it. Did not use sheilding gas but I did use flux.
Sent from my SGH-T889 using Tapatalk 2
New Member
I cleaned the inside as much as I could with a dremel, then I brushed on solar flux and welded it. Did not use sheilding gas but I did use flux.
Sent from my SGH-T889 using Tapatalk 2
Everlast PowerTIG 225LX
Everlast Power IMIG 200
Member
How does the inside of the weld look?Originally Posted by sw2x
Miller 252
PowerTig 250 EXT
Evolution Rage 2
48X6 inch Belt Sander w/ 9 inch Disk Sander
...
Posting Permissions
Reply With Quote