Share
Page 2 of 3 FirstFirst 123 LastLast
Results 21 to 40 of 53

Thread: Are the new 2013 models out yet?

  1. #21

    Default

    Shane,

    We have had the MTS for a while, but they are getting added features so it is worth the wait. But, I have used the IMIGs since day one, have a 200, 205P and 250P. I would never trade them just to add TIG, but me that is extra work. So for me, I have two TIGs with tanks and 3 MIG with tanks. So it is all what works for you. But the old units are fantastic as well.
    Mike R.
    Email: admineverlast@everlastwelders.com
    www.everlastgenerators.com
    www.everlastwelders.com
    877-755-9353 x203
    M-F 12 - 7PM PST
    FYI: PP50, PP80, IMIG-200, IMIG-250P, 210EXT and 255EXT.

  2. #22
    Join Date
    Jan 2013
    Location
    Minneapolis, MN
    Posts
    80

    Default

    ANyone have an idea if the US TIG's are being shipped ? Oleg mentioned two weeks about two weeks ago. Really looking forward to some of my projects Thanks - Ryan

  3. #23

    Default

    I had heard end of this month. After the 22nd plus. But not 100% sure. Waiting on a 2013 250EX myself. But the old 250EX and 210EXT are serving me well so not that excited. But for those that have them on order I am sure they are.
    Mike R.
    Email: admineverlast@everlastwelders.com
    www.everlastgenerators.com
    www.everlastwelders.com
    877-755-9353 x203
    M-F 12 - 7PM PST
    FYI: PP50, PP80, IMIG-200, IMIG-250P, 210EXT and 255EXT.

  4. #24

    Default

    Quote Originally Posted by Titan winch View Post
    For what ever it might be worth my opinion and actually that of the person who does all the mig unit testing at the factory,the best mig function model to date is the synergic MTS models in the 200 and 250 amp.
    I have to agree with this evaluation as I was testing the units the other week and this is what brought up the question and the reason I asked.
    Mind you it is a close call between these and the 205 ( I have the most time on the I-Mig 205 so it is the easiest for me to relate to )
    The new model digitals may very well be as good or better but at this point until you start actually evaluating them there is little you can say to the quality of weld they will put out.Cheers
    Interesting. I was researching the IMig models a bit, but this comment about the got me looking at the MTS models, which has me a bit confused.

    • The Everlast site shows the MTS200 and MTS250S, but the photo on the main 1-phase MTS page shows an MTS200S
    • The Everlast eBay store has the MTS200S and MTS160 listed
    • Amazon has the MTS160, MTS200S, but the new 2013 MTS250S
    • There is a link to a manual on the Everlast site (from Dec 2012) for the MTS200/200S/250S, but the manual itself only seems to explain the MTS200 and MTS250S (though the cover page makes mention of the MTS160). There is also a link (from July 2011) to a manual for the MTS160/200S
    • I've seen videos (links were posted in another thread) reviewing a MTS210, which I can't find on sale anywhere.

    I'm assuming the 'S' suffix refers to synergic, and therefore I had assumed that the MTS200S is an update to the MTS200. But the manual for the MTS200 is newer than the MTS200S manual, which tells me the opposite. And the availability of the MTS200S on eBay and Amazon, but not on the Everlast site, confuses me.

    The MTS200S doesn't seem to have a setting for a spool gun, while the MTS200 does. The MTS200S also does not seem to have settings for up/down slope, pre/post flow, or foot pedal as the MTS200 does. MTS200 and MTS250S appear to have the ability to save settings in memory.

    So I'm just trying to figure out what is what. Not that a machine with a one year older or newer design is a big deal, I'm just trying to understand the selection. Any clarification would be appreciated. Thanks!
    Everlast PowerArc 140ST

  5. Default

    Here is the face and look of the MTS 200S model. As you can see it is full synergic spool gun capable.
    Cheers
    P.S I think it may even be on sale on some of our local forums we sponsor .
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	image.jpg 
Views:	138 
Size:	141.1 KB 
ID:	9467   Click image for larger version. 

Name:	image.jpg 
Views:	137 
Size:	135.7 KB 
ID:	9466  
    EVERLAST CANADA
    www.everlastwelders.ca
    www.titanwinches.com

    905 637 1637

  6. #26

    Default

    Nice! So if I order from Amazon or the Everlast eBay store, is this what I would get? Because this isn't what the photos show at this time, and the MTS200S is not even listed on Everlast's own site.

    When you say "some of our local forums we sponsor", whom do you mean?

    I'm hoping to put together the scratch to purchase a MIG machine in the next few months, and I think my primary candidates are now the IMig 205/205P and the MTS200S - each of which has their own little 'extra' features. And who knows - by the time I'm ready to make my purchase, maybe the new digital MIG will be available to consider as well. Thanks!
    Everlast PowerArc 140ST

  7. #27

    Default

    Just want to be clear

    MTS160 and 200S is no longer available . Amazon and ebay will be updated this week.

    MTS200 and 250S are current two models. Our website is already updated
    Oleg Gladshteyn
    Phone: 650 588 8082 / 877 755 WELD
    Cell: 415 613 6664 ONLY IF YOU REALLY NEED IT
    Email: oleg@everlastwelders.com
    Website www.everlastgenerators.com

    www.linkedin.com/pub/oleg-gladshteyn/48/b08/875

  8. Default

    Quote Originally Posted by Oleg View Post
    Just want to be clear

    MTS160 and 200S is no longer available . Amazon and ebay will be updated this week.

    MTS200 and 250S are current two models. Our website is already updated
    That is for the USA in Canada the synergic 200S model is available .
    EVERLAST CANADA
    www.everlastwelders.ca
    www.titanwinches.com

    905 637 1637

  9. #29

    Default

    Quote Originally Posted by Oleg View Post
    Just want to be clear

    MTS160 and 200S is no longer available . Amazon and ebay will be updated this week.

    MTS200 and 250S are current two models. Our website is already updated
    Thanks Oleg - that clears it up! A bit of a shame for me (being in the US), though - the 200S shown above looks like exactly what I wanted - not quite as big as the 250S, but with all the bells, whistles, features and knobs for me to play with.
    Everlast PowerArc 140ST

  10. #30

    Default Any possibility of a backorder list with dates?

    Thank you, those in the know, for information as it comes available. It looks like there are a lot of moving pieces and any information, even from other markets, is beneficial.

    It would be awesome if the forum had some kind of current model backorder list with projected availability dates. It may be a handy (call-reducing) resource for those on waiting lists. I understand there are no guarantees, and I'm not asking for even daily updates. Any semi-realistic date would be better than nothing. Welders-in-waiting could see the date as it changes and be able to plan accordingly. If things get pushed back a month then so be it. It is what it is. If folks know the list is updated, say, every other Friday then we'll know where and when to check.

    If every 10th viewer of the backorder list would have called, that's "n" fewer calls to what sounds like really busy folks. I've called. It sounds like a madhouse. I feel bad asking the same question as 50 others have earlier in the day.

    Personally, I'm not in a big rush. It's a hobby for me. However, I will be both moving to a place with no garage and selling my old (red box) unit. I just need to know when to sell my old unit, and what projects may need to be abandoned before the move. My need for a shipping date isn't that serious, but I'll bet there are others who could benefit from a little heads up for planning purposes as well.

    From the outside looking in a simple list updated every week or two could really help. Perhaps a "sticky" (with miggy & tiggy) thread?
    Or, does such a list/site already exist and I'm looking like a noob ?

    For those who wait to test: Thank You! I'd rather wait for an additionally QA'd product any day.

  11. Default

    My 2013 250EX is supposedly shipping out today, I hope thats the case. I have a tracking # but it doesn't show as shipped yet.
    Soon to be 2013 250EX tig machine
    Lincoln Idealarc DC250 with LN7 wire feeder
    RSG250 spool gun and controller for above.
    Hypertherm Powermax85 with Machine and hand torch
    Bridgeport Milling Machine w/DRO and Powerfeed
    South Bend 9 lathe WW2 vintage
    Devilbiss 6.5hp 80gal 175psi 2 stage compressor
    HF blast Cabinet modified for foot pedal operation better gun.
    Oxy/A torches
    Delta 4x6 band saw
    Hand and power tools up the wazoo.

    The name's "Marcel" in case I forget to sign.

  12. #32
    Join Date
    Jan 2013
    Location
    Minneapolis, MN
    Posts
    80

    Default

    Sweet! Hope mine ships in the next couple of days!

  13. #33
    Join Date
    Jan 2013
    Location
    Minneapolis, MN
    Posts
    80

    Default

    Thank you! Can's wait to weld with it! I'll be posting lots of photos and shots of my welds! PLUS I started GTAW ( in school) two days ago and my welds are already looking better then I thought I could ever do....can't wait! THANKS EVERLAST!!!!

  14. Default

    My 250 EX has shipped. I should have it monday!
    Soon to be 2013 250EX tig machine
    Lincoln Idealarc DC250 with LN7 wire feeder
    RSG250 spool gun and controller for above.
    Hypertherm Powermax85 with Machine and hand torch
    Bridgeport Milling Machine w/DRO and Powerfeed
    South Bend 9 lathe WW2 vintage
    Devilbiss 6.5hp 80gal 175psi 2 stage compressor
    HF blast Cabinet modified for foot pedal operation better gun.
    Oxy/A torches
    Delta 4x6 band saw
    Hand and power tools up the wazoo.

    The name's "Marcel" in case I forget to sign.

  15. #35
    Join Date
    Oct 2012
    Location
    Canada, Suttonwest, Ontario
    Posts
    676

    Default

    Truck load. Well I got all my Everlast products this week now getting it set up.
    Everlast PowerTig 2013-250EX w/cart (Canada)
    Everlast Power I-MIG 205 w/spoolgun w/cart (Canada)
    Everlast PowerCool W300 (Canada)
    Everlast PowerPlasma 70 w/cart (Canada)

    Click image for larger version. 

Name:	2013 250EX Front & Cooler.jpg 
Views:	185 
Size:	142.0 KB 
ID:	9570Click image for larger version. 

Name:	2013 250EX Front with Cover down.jpg 
Views:	150 
Size:	138.7 KB 
ID:	9571Click image for larger version. 

Name:	2013 250EX Front with Cover up.jpg 
Views:	170 
Size:	134.1 KB 
ID:	9572Click image for larger version. 

Name:	2013 250EX LH.jpg 
Views:	141 
Size:	143.5 KB 
ID:	9573Click image for larger version. 

Name:	2013 250EX RH.jpg 
Views:	162 
Size:	142.5 KB 
ID:	9574Click image for larger version. 

Name:	Truck load Everlast Machines.jpg 
Views:	147 
Size:	140.3 KB 
ID:	9575
    Everlast PowerTig 325EXT (Canada)
    Everlast Power I Mig 250 (Canada)
    Everlast PowerPlasma 80S (Canada)
    Everlast PowerCool W300 (Canada)
    Everlast PowerMTS 250S Fitted with a 30A Spoolgun(Canada)
    Miller Dynasty 400 wireless(Canada)
    Millermatic 252 plus 30A Spoolgun(Canada)

  16. Default

    What is the status on the 2013 power pro 205? I haven't received any status updates on my preorder.

  17. #37

    Default

    Quote Originally Posted by E36M3 View Post
    What is the status on the 2013 power pro 205? I haven't received any status updates on my preorder.
    ALL MODELS IN STOCK !!! YA !!!!

    most were shipped .. some going out today !
    Oleg Gladshteyn
    Phone: 650 588 8082 / 877 755 WELD
    Cell: 415 613 6664 ONLY IF YOU REALLY NEED IT
    Email: oleg@everlastwelders.com
    Website www.everlastgenerators.com

    www.linkedin.com/pub/oleg-gladshteyn/48/b08/875

  18. #38

    Default

    Quote Originally Posted by Kempy View Post
    Truck load. Well I got all my Everlast products this week now getting it set up.
    Everlast PowerTig 2013-250EX w/cart (Canada)
    Everlast Power I-MIG 205 w/spoolgun w/cart (Canada)
    Everlast PowerCool W300 (Canada)
    Everlast PowerPlasma 70 w/cart (Canada)
    Dang! It sure looks like you got the whole stable filled now.

  19. Default

    Quote Originally Posted by Oleg View Post
    ALL MODELS IN STOCK !!! YA !!!!

    most were shipped .. some going out today !
    someone in sales needs to do a better job of communicating with customers.

    just sayin'

  20. Default

    Any news the 2013 power pro 205? I haven't received any status updates on the one I pre ordered.

Similar Threads

  1. How about some 220v -440v single phase models
    By TheGary in forum Pre-sales, Sales and Shipping questions
    Replies: 0
    Last Post: 01-16-2016, 07:16 PM
  2. Sneak peak at 2016 models.
    By performance in forum Everlast Announcements, Contests and Promotions
    Replies: 41
    Last Post: 09-24-2015, 05:53 PM
  3. new models in the pipeline
    By TheGary in forum Everlast Announcements, Contests and Promotions
    Replies: 1
    Last Post: 05-18-2015, 05:47 PM
  4. 2013 Summer Time Contest. June 21- October 1 2013
    By performance in forum Everlast Announcements, Contests and Promotions
    Replies: 54
    Last Post: 04-12-2014, 02:42 AM
  5. October special on the NEW units and models.
    By admin in forum Everlast Announcements, Contests and Promotions
    Replies: 2
    Last Post: 10-25-2008, 12:14 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •