Ed that was never completely the case with the 200DX. You had an amp control knob that limited maximum amps on the pedal. But true, it would only read the amps when the pedal was pressed. But the knob would give you a numerical value that wasn't amps, but once used a little bit you could get the hang of it. It would represent an approximate setting of the foot pedal and you could translate that value into the maximum amp setting as the knob was turned. (all our units change from a static amp reading to true output once the pedal is pressed) But since about the middle of this year, the panel knob limited the amps for the foot pedal. It isn't a new pedal in fact, it is the same one but without the limiting knob on the pedal.
Reply With Quote