2013 PowerArc 200 ST Dual Voltage

[Titan winch]

The all new 2013 POWERARC 200 ST is in fact new . We have taken our POWERARC 200 and fitted it with lift Tig and added Dual Voltage .
We have also redesigned the PCB board for a cleaner more reliable design
All Dual voltage units will be supplied with a 110 / 240 v adapter pigtail

[joeftw18]

Is the POWERARC 200ST going to be sold inside the USA at some point?

[performance]

Yes,
Not sure of the current stock of the 200st, but it will be.

[Titan winch]

Is the POWERARC 200ST going to be sold inside the USA at some point?

I believe jean put these on sale on Ebay today with shipping for both Canada and the USA

[SeanMurphy265]

We have also redesigned the PCB board for a cleaner more reliable design

I already thought it was a very reliable welder! I'm not sure that I've even read any issues on the forums.

[Titan winch]

I already thought it was a very reliable welder! I'm not sure that I've even read any issues on the forums.

There are very few issues with this welder , however with the redesign of a few months ago with the sensing for. 110v - 220v , the dual voltage on many ( not all yet but working on it ) has been improved p
Another example with voltage inputs changing with nominal power at you box and then adding longer extension cords ,this could bring in too high a amp draw for some relays on the older versions causing possible problems. In real world use this may never be a issue but if it can be improved then it should be
Cheers