Can you post a picture of the inside of the gang box? I've been looking at these, they seem to run from $300.00 to as much as you want to spend!
Senior Member
Can you post a picture of the inside of the gang box? I've been looking at these, they seem to run from $300.00 to as much as you want to spend!
Lincoln Eagle Engine Drive
Everlast MTS 250
Everlast Power Tig 225lx
HTP Mig 2400
Everlast Power Plasma 60C --> Just need to finish my CNC Plasma Table!
Miller Spectrum 375 Extreme Plasma cutter
Victor cutting torch
HF 20 Ton Shop Press
HF 4x6 Band Saw
HF Air Compressor
Northern Tool Drill Press
www.murphywelding.com
Member
posted once but got logged out while looking for photos. i don't have any with the stock shelf. i generally cut it out when i get a box. have had a lot of them, not much difference between sellers. greeenlee, ridgid or knaack. i remove the shelf because they get in the way. or put in a temporary shelf out of 4 or 6 inch AL channel. the boxes on the trailer and my truck are new but i don't have a pic. they are a good idea if you are going to be in the field. i would not pay more than 150 for a used box in good condition.
found one.
Last edited by fdcmiami; 12-26-2012 at 01:07 PM.
Posting Permissions
Reply With Quote