Results 1 to 2 of 2

Thread: Newbie intro

  1. #1

    Default Newbie intro

    I'm Scott and I'm new to the forum. I'm a long time drag racer and have been TIG welding for a number of years at a hobbyist level. I've been using a Miller Syncrowave 180 machine, but I've wanted an inverter machine for a long time but could never afford one. I found the Everlast Machines through Jody at and he seems to have had good luck with the machines, though many "purists" seem to knock any of the imported machines. The plain fact is, I would have bought a Miller if I could have afforded it, but they are out of my price range. I'm hopeful my new PowerPro 256 machine will be a worthy investment. I'm about to find out.

  2. #2
    Join Date
    Apr 2012
    Washington State


    Hi Scott, welcome to the forum! There are quite a few people here who like to "go fast" so you are in good company. Cheers!
    Is it OK to want to break something just so that you can weld it back together?

    Everlast PowerTIG 185 Micro IGBT AC/DC Welder

Similar Threads

  1. Intro
    By SuwanneeDave in forum Introduce Yourself
    Replies: 1
    Last Post: 02-24-2015, 07:49 PM
  2. je1957 intro
    By je1957 in forum Introduce Yourself
    Replies: 3
    Last Post: 07-10-2013, 01:09 PM
  3. Intro and layin' some newbie beads
    By DWSD in forum TIG Welding (GTAW/GTAW-P)
    Replies: 8
    Last Post: 02-16-2012, 03:16 AM
  4. New Meber Intro and Looking For Advice
    By metallurgist in forum Multi-Process Units (TIG,Stick,Plasma/MIG,TIG,Stick Combo units)
    Replies: 7
    Last Post: 07-06-2011, 04:22 PM
  5. Intro'ing Myself...
    By everlastjj in forum Introduce Yourself
    Replies: 0
    Last Post: 04-13-2011, 03:51 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts