Great build! Gosh you make nice stuff. Something for me to aspire to. Can't wait to see it with the grates in and everything in place. Cheers!
Senior Member
Great build! Gosh you make nice stuff. Something for me to aspire to. Can't wait to see it with the grates in and everything in place. Cheers!
Is it OK to want to break something just so that you can weld it back together?
Everlast PowerTIG 185 Micro IGBT AC/DC Welder
Senior Member
Thanks.... I wish I would have planned a little better so I didn't have to change the design for the swivel. Oh well...
PowerTig 250EX
Power I-MIG 200
Power Plasma 50
It's what you learn, After you know it all, that counts!
Senior Member
I think somebody around here once told me that if you aren't making mistakes, you're not learning.Originally Posted by CGCINC
Thanks.... I wish I would have planned a little better so I didn't have to change the design for the swivel. Oh well...
I like the idea for a plasma cutting area, something that I will definitely consider if I ever get around to building a cart.
Agreed on the extra outlets. Are you planning a place to stow/hang a grinder or 2 on there?
Penncrest Buzzbox - Infinite amp control! Man the 70's were good.
Everlast Powerplasma 60 - Reliable unit, cuts well.
Everlast i-MIG 250P w/spoolgun - Really smooth, plenty of cajones.
Everlast 250EXT - Sometimes it just takes a kick in the balls...
Everlast 255EXT - Just started playing
Senior Member
I didn't plan any hangers... I have grinders all over so they are usually close if needed. I do plan to add some metal under the bandsaw area for a low shelf to store stuff. I really just needed to get my band saw higher and a place to plasma since I'm screwing up my welding table using it to cut on....
PowerTig 250EX
Power I-MIG 200
Power Plasma 50
It's what you learn, After you know it all, that counts!
Senior Member
Finished the cutting grate.
Messed around with some different designs but settled on this one. I used 2" square tubing for the diamond shapes.
I figured I could use that area to drill or blow holes with the plasma.
Last edited by zoama; 11-27-2012 at 12:01 AM. Reason: Fixed an img tag
PowerTig 250EX
Power I-MIG 200
Power Plasma 50
It's what you learn, After you know it all, that counts!
Senior Member
OK, now your stuff is simply putting my meager abilities to shame ... LOL
Golly, that turned out great! Nice to see you're putting that bandsaw to good use.
Is it OK to want to break something just so that you can weld it back together?
Everlast PowerTIG 185 Micro IGBT AC/DC Welder
Senior Member
How are you liking the saw? I've got a short list of equipment that I would like to buy, and a good saw is on the list. The 4x8 is fine, but it would be good to have something a little nicer and easier to cut angles.
Lincoln Eagle Engine Drive
Everlast MTS 250
Everlast Power Tig 225lx
HTP Mig 2400
Everlast Power Plasma 60C --> Just need to finish my CNC Plasma Table!
Miller Spectrum 375 Extreme Plasma cutter
Victor cutting torch
HF 20 Ton Shop Press
HF 4x6 Band Saw
HF Air Compressor
Northern Tool Drill Press
www.murphywelding.com
Senior Member
That has got to be the most bitchin' grate design ever. I'm gonna cry when that actually sees a torch.
Penncrest Buzzbox - Infinite amp control! Man the 70's were good.
Everlast Powerplasma 60 - Reliable unit, cuts well.
Everlast i-MIG 250P w/spoolgun - Really smooth, plenty of cajones.
Everlast 250EXT - Sometimes it just takes a kick in the balls...
Everlast 255EXT - Just started playing
Senior Member
Probably not the most functional though..... lolThat has got to be the most bitchin' grate design ever. I'm gonna cry when that actually sees a torch.
PowerTig 250EX
Power I-MIG 200
Power Plasma 50
It's what you learn, After you know it all, that counts!
Posting Permissions
Reply With Quote
