
Originally Posted by
Kempy
2013-PT255EXT
So as I keep reading on the forum about the old 250 EXT’s and 2013-255EXT replacement unit, I would like to know more about the memory setting numbers 0 to 9 do? Mainly what it does not do, as in what it does not save?
If that is available at this time.
The memory setting memorizes everything from tig/stick, power settings, frequencies.... But for myself the logic is so easy to change I just adjust the settings as I work with the 250 EXT. It looks like the 255 EXT logic will be similar and that is a good thing because the 250 EXT is easy to program.
Miller 252
PowerTig 250 EXT
Evolution Rage 2
48X6 inch Belt Sander w/ 9 inch Disk Sander
...