Share
Page 3 of 13 FirstFirst 12345 ... LastLast
Results 41 to 60 of 257

Thread: NEW 2013 EVERLAST PowerTig 255 EXT AC/DC DIGITAL TIG WELDER

  1. #41

    Default

    Quote Originally Posted by JimMinKent View Post
    Thanks Oleg,

    As long as you're fine, I'm fine, and I can still use my ext while it's here.

    That's very nice news on the first 500, I'm sure Duncan will keep them on track for a successful North American variant. I also look forward to any pix, specs, or anectodes about this project.

    Will they reprint the front panels to have the model correctly stated as the 255EXT?

    Now here is my last wish for today, since it only has One knob, can we have a nice one, maybe like the 250EX amp knob?

    Okay, now that I've spent all of my wishes for this week, I bid you each good night.

    Jim
    Hey Jim

    Yes for now all guys can use the welders. Finial version will have all correct prints and we working on nubs as well.
    Mark actually found some very nice new nubs that will go on all of our units. 250EXT nightmare will not happen again
    Oleg Gladshteyn
    Phone: 650 588 8082 / 877 755 WELD
    Cell: 415 613 6664 ONLY IF YOU REALLY NEED IT
    Email: oleg@everlastwelders.com
    Website www.everlastgenerators.com

    www.linkedin.com/pub/oleg-gladshteyn/48/b08/875

  2. Default

    Oleg, thanks for this news, now it's going to be even harder to wait!

    Jim

  3. Default

    will the new units be similar in looks to what is posted originally in the thread?

  4. #44

    Default

    No, this is EU look.
    Ours will be as posted earlier
    Oleg Gladshteyn
    Phone: 650 588 8082 / 877 755 WELD
    Cell: 415 613 6664 ONLY IF YOU REALLY NEED IT
    Email: oleg@everlastwelders.com
    Website www.everlastgenerators.com

    www.linkedin.com/pub/oleg-gladshteyn/48/b08/875

  5. #45

    Default

    new argon regulator that will come with all ACDC TIG AND ACDC COMBO units

    Click image for larger version. 

Name:	argonregulatorNEW.jpg 
Views:	347 
Size:	7.3 KB 
ID:	9111
    Oleg Gladshteyn
    Phone: 650 588 8082 / 877 755 WELD
    Cell: 415 613 6664 ONLY IF YOU REALLY NEED IT
    Email: oleg@everlastwelders.com
    Website www.everlastgenerators.com

    www.linkedin.com/pub/oleg-gladshteyn/48/b08/875

  6. #46
    Join Date
    Oct 2012
    Location
    Canada, Suttonwest, Ontario
    Posts
    676

    Default

    Look just like Victor Regulators I have and they work just fine.Click image for larger version. 

Name:	My Regulators Victors.jpg 
Views:	314 
Size:	145.2 KB 
ID:	9112
    Everlast PowerTig 325EXT (Canada)
    Everlast Power I Mig 250 (Canada)
    Everlast PowerPlasma 80S (Canada)
    Everlast PowerCool W300 (Canada)
    Everlast PowerMTS 250S Fitted with a 30A Spoolgun(Canada)
    Miller Dynasty 400 wireless(Canada)
    Millermatic 252 plus 30A Spoolgun(Canada)

  7. #47
    Join Date
    May 2012
    Location
    Disneyland
    Posts
    2,661

    Default

    Looks more like my favorite the TIG MASTER, with the square column instead of round like the Victor. Either way I like this design a lot.
    Long arc, short arc, heliarc and in-the-dark!

  8. #48

    Default

    Looks like all the new machines show improvements in my opinion. I hope they live up to the expectations
    Jason
    Everlast 255EXT - Perfection
    Everlast PowerPro 256 - UPS Demolished
    Everlast MTS200s
    12 Ton Shop Press
    DeWalt Hand Tools/ChopSaw

  9. #49

    Default

    Jason, there are a few surprises more that will be introduced this year. We're still holding a few cards on thing we have been working on. You see those wrapped connections etc? Everything we have been doing in the last few years is coming together as far as quality and cooperation from the factory.

  10. Default

    Now that the new year has started is the release date still pretty much accurate?

  11. #51
    Join Date
    Oct 2012
    Location
    Canada, Suttonwest, Ontario
    Posts
    676

    Default

    Mark

    Just like when work a Honda when they would tell us about new models and say here is the cake but you can't eat it Ha Ha.

    Quote Originally Posted by performance View Post
    Jason, there are a few surprises more that will be introduced this year. We're still holding a few cards on thing we have been working on. You see those wrapped connections etc? Everything we have been doing in the last few years is coming together as far as quality and cooperation from the factory.
    Everlast PowerTig 325EXT (Canada)
    Everlast Power I Mig 250 (Canada)
    Everlast PowerPlasma 80S (Canada)
    Everlast PowerCool W300 (Canada)
    Everlast PowerMTS 250S Fitted with a 30A Spoolgun(Canada)
    Miller Dynasty 400 wireless(Canada)
    Millermatic 252 plus 30A Spoolgun(Canada)

  12. #52
    Join Date
    Dec 2009
    Location
    Greater Seattle, WA
    Posts
    813

    Default

    Quote Originally Posted by Oleg View Post
    new argon regulator that will come with all ACDC TIG AND ACDC COMBO units

    Click image for larger version. 

Name:	argonregulatorNEW.jpg 
Views:	347 
Size:	7.3 KB 
ID:	9111
    Looking good... nice move, Oleg!
    '13 Everlast 255EXT
    '07 Everlast Super200P

  13. #53
    Join Date
    Feb 2011
    Location
    Fridley, Minnesota
    Posts
    376

    Default This is good!

    I've been using my 250 EX for little projects here and there, and even though I LOVE the way it performs, I think that this new machine could make it possible for me to do some things that I'm currently unable to do. The ONE feature that really has me bummed is that the AC advanced pulse will only go to 10hz. I've been playing with the pulse settings on the EX, and found that: on 11ga aluminum, getting up to around 120+ hz, and setting the background at about 30% with a base current at 180 amps, the ease at which I can run a bead on say, an outside corner, is MUCH nicer and easier to control than running a straight, non-pulsed 120-130 amps. I'm still a noob at the whole TIG thing, but learning the capabilities of my 250EX at the same time that I'm honing my skills is making the progress toward becoming a better welder progress much faster than when I was using my Linde Ucc-305. I want this new welder simply because it's the latest technology, but I'll survive with the 250EX just fine until A: I can afford the upgrade, and B: the pulse frequency is upped into at LEAST 200 hz on the AC advanced. Bottom line: I want a new one because they're COOL
    "It's not magic it's experimental, kind of like washing your hands after pooping used to be." -House

    Everlast PowerTig 250EX-arrived 1-26-2012
    Everlast PowerCool W300-arrived 1-26-2012
    Everlast PowerTig 185 Micro-arrived 1-26-2012
    Everlast PowerPlasma 70-arrived 1-26-2012
    ESAB MigMaster 250-borrowed
    HyperTherm 151 AKA "The Light Sabre"
    Linde UCC-305-964 lb. of old time water cooled TIG love-SOLD-Bad MOJO
    Purox OXY/ACETYLENE

  14. #54

    Default

    Hooda,
    Having a high pulse frequency isn't the purpose of the advanced pulse. First, a high pulse frequency for this AC/DC thing isn't possible I don't think because it is physically switching sides of the inverter and the output. But on a larger note, the pulse in the advanced mode helps freeze the puddle rapidly on advanced aluminum, while having rapid forward travel, and creating a more "defined" stack of dimes. It's almost like bump welding without the arc going off completely.

    I'll try to make a more detailed video of the pulse soon. We have one up, but the camera was giving some problems. Working on figuring out how to get better shots. If I can get a close up, you'll be able to see how the welder works on advanced better.
    Last edited by performance; 01-13-2013 at 06:33 PM.

  15. #55

    Default

    Quote Originally Posted by performance View Post
    I'll try to make a more detailed video of the pulse soon. We have one up, but the camera was giving some problems. Working on figuring out how to get better shots. If I can get a close up, you'll be able to see how the welder works on advanced better.
    I bet Jody would share some video tips. He doesn't seem like the type that would keep it secret.
    2013 250EX : SSC Pedal : I-MIG 250P 20' Profax gun : Power Plasma 60 p80 torch : 3M Speedglas 9100XX : Evolution Rage 3 DB cold saw

  16. #56
    Join Date
    Oct 2012
    Location
    Canada, Suttonwest, Ontario
    Posts
    676

    Default

    2013-PT255EXT
    So as I keep reading on the forum about the old 250 EXT’s and 2013-255EXT replacement unit, I would like to know more about the memory setting numbers 0 to 9 do? Mainly what it does not do, as in what it does not save?
    If that is available at this time.
    Everlast PowerTig 325EXT (Canada)
    Everlast Power I Mig 250 (Canada)
    Everlast PowerPlasma 80S (Canada)
    Everlast PowerCool W300 (Canada)
    Everlast PowerMTS 250S Fitted with a 30A Spoolgun(Canada)
    Miller Dynasty 400 wireless(Canada)
    Millermatic 252 plus 30A Spoolgun(Canada)

  17. #57
    Join Date
    Oct 2011
    Location
    Litchfield Park, AZ
    Posts
    370

    Default

    Quote Originally Posted by Kempy View Post
    2013-PT255EXT
    So as I keep reading on the forum about the old 250 EXT’s and 2013-255EXT replacement unit, I would like to know more about the memory setting numbers 0 to 9 do? Mainly what it does not do, as in what it does not save?
    If that is available at this time.
    The memory setting memorizes everything from tig/stick, power settings, frequencies.... But for myself the logic is so easy to change I just adjust the settings as I work with the 250 EXT. It looks like the 255 EXT logic will be similar and that is a good thing because the 250 EXT is easy to program.
    Miller 252
    PowerTig 250 EXT
    Evolution Rage 2
    48X6 inch Belt Sander w/ 9 inch Disk Sander
    ...

  18. #58
    Join Date
    Oct 2011
    Location
    Litchfield Park, AZ
    Posts
    370

    Default

    Also, are there any updates on the testing of the 255 EXT?
    Miller 252
    PowerTig 250 EXT
    Evolution Rage 2
    48X6 inch Belt Sander w/ 9 inch Disk Sander
    ...

  19. #59

    Default

    I have been away for a bit and not much seems to have happened. I would also like to have an update on the 255EXT. Oleg stated his target was a March delivery, and March 1st is 3 days away, and no talk that I can see ... Everlast, let's not get too tight lipped as a reaction to the 250EXT experience, part of why people like this company is the openness to it's customers.

    Come on, throw us a bone!

    Cheers,

    Mike

  20. #60

    Default

    Quote Originally Posted by Mike J View Post
    I have been away for a bit and not much seems to have happened. I would also like to have an update on the 255EXT. Oleg stated his target was a March delivery, and March 1st is 3 days away, and no talk that I can see ... Everlast, let's not get too tight lipped as a reaction to the 250EXT experience, part of why people like this company is the openness to it's customers.

    Come on, throw us a bone!

    Cheers,








    Mike

    Mike , you got a refund and at this point 255EXT doesn't really concerns you. I can tell you one thing .. Our 255EXT will be out MUCH sooner then Miller Dynasty 280

    have a good evening
    Oleg Gladshteyn
    Phone: 650 588 8082 / 877 755 WELD
    Cell: 415 613 6664 ONLY IF YOU REALLY NEED IT
    Email: oleg@everlastwelders.com
    Website www.everlastgenerators.com

    www.linkedin.com/pub/oleg-gladshteyn/48/b08/875

Similar Threads

  1. NEW 2013 EVERLAST PowerITig 200T DC DIGITAL PULSE TIG WELDER LOW 2AMP START !
    By performance in forum Everlast Announcements, Contests and Promotions
    Replies: 22
    Last Post: 04-12-2016, 08:15 PM
  2. NEW 2013 Everlast PowerTIG 200DX AC/DC TIG DUAL VOLTAGE welder
    By performance in forum Everlast Announcements, Contests and Promotions
    Replies: 28
    Last Post: 03-04-2013, 02:23 AM
  3. NEW 2013 Everlast PowerMIG 210 and 200 MIG / TIG DIGITAL WELDER
    By Oleg in forum Everlast Announcements, Contests and Promotions
    Replies: 14
    Last Post: 02-10-2013, 01:13 AM
  4. NEW 2013 EVERLAST PowerTIG 185 ACDC TIG / STICK WELDER
    By performance in forum Everlast Announcements, Contests and Promotions
    Replies: 23
    Last Post: 12-24-2012, 12:43 AM
  5. Mystery Welder Revealed: 2012 DIGITAL POWERTIG 210EXT TIG/STICK welder
    By performance in forum Everlast Announcements, Contests and Promotions
    Replies: 46
    Last Post: 07-28-2012, 02:19 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •