Share
Results 1 to 20 of 29

Thread: NEW 2013 Everlast PowerTIG 200DX AC/DC TIG DUAL VOLTAGE welder

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default NEW 2013 Everlast PowerTIG 200DX AC/DC TIG DUAL VOLTAGE welder

    We've been holding onto this pleasant surprise for a while and now are proud to introduce it.

    This PowerTIG 200DX has been updated late this year with the addition of preflow , panel control over max amps while using the foot pedal and offers increased pulse frequency up to 150 Hz. But most significant is the fact that the PowerTIG 200 DX is now available as DUAL-VOLTAGE! This will allow the unit to be used in almost any environment and increases portability . The output on 120V of course is reduced, but still gives adequate output to weld lighter gauge materials. And now, it has arc force control for serious stick welding with E 7018/6011.

    One thing about it, is that the new pulse frequency, and addition of preflow really targets the customer comments we have received. They have asked for it, and they have gotten it. This is one of the best packaged 200 amp welders you'll find for this price anywhere.

    PowerTig 200DX 220v - 1200.00
    PowerTig 200DX 220v/110v - 1350.00
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	200 DX 2013 panel.JPG 
Views:	1804 
Size:	62.6 KB 
ID:	8542  

  2. #2
    Join Date
    Sep 2011
    Location
    Middleburg Florida
    Posts
    556

    Default

    So Dual Voltage was just added? All the other features look the same as the one I got in June...
    Trip Bauer
    Former USN HT
    Everlast 200DX New Model
    Hobart Handler 125 MIG
    Van Norman #12
    Atlas 12" engine lathe
    '98 RoadKing - 84 Ironhead - 59 Ironhead

  3. #3

    Default

    Yep. Trip, the "new" features of the 200DX were only available in limited qtys as sort of a special pre edition release. The dual voltage is new, and is in limited supply until the first of the year. First come, first served. Expect a slight price increase for the dual voltage

  4. #4
    Join Date
    Sep 2011
    Location
    Middleburg Florida
    Posts
    556

    Default

    Was hoping something magical happened and I just didn't know mine was dual voltage...

    Neat feature, and worth a bit of a price bump.

    Speaking of features, just to toss this out there and not something worthy of it's own thread... Am I the only one who finds the power switch on the back of the machine a PITA? I'm sure it makes sense internally, routing and all, but man it'd be nice if it was on the front panel too.
    Trip Bauer
    Former USN HT
    Everlast 200DX New Model
    Hobart Handler 125 MIG
    Van Norman #12
    Atlas 12" engine lathe
    '98 RoadKing - 84 Ironhead - 59 Ironhead

  5. #5
    Join Date
    May 2012
    Location
    Disneyland
    Posts
    2,662

    Default

    Quote Originally Posted by Trip59 View Post
    Speaking of features, just to toss this out there and not something worthy of it's own thread... Am I the only one who finds the power switch on the back of the machine a PITA? I'm sure it makes sense internally, routing and all, but man it'd be nice if it was on the front panel too.
    Virtually all compact equipment that uses a circuit breaker for a power switch, have them on the back. It's a space issue, that unit is large and there would be no room for it up front. So to put a front mounted switch, you would have to add a contactor to do the heavy switching, and even if you had room (which there probably isn't) it would add at least $100-$200 to the price. I see these rear mounted breakers on all kinds of machines, it just makes sense. If you want to have a front switch, add it to your welding cart. I would rather they keep the prices lower. After all you still have to reach back and open your argon bottle. Even the Miller Dynasty 200 has the switch on the back.
    Last edited by Rambozo; 11-22-2012 at 04:24 AM.
    Long arc, short arc, heliarc and in-the-dark!

  6. #6

    Default

    Bingo, I'm suddenly glad I've waited. In fact, this might even allow me to sell off my 160STH. Good news. S/F....Ken M
    Lincoln Power MIG 300
    Everlast 160STH
    Miller 225 Thunderbolt (sold it)
    Lincoln Squarewave 175 TIG(traded it for)
    Miller DEL 200 welder/genset
    Thermal Dynamics 1250XL plasma cutter
    Miller XMT300

  7. #7

    Default

    So would I be able to order a new 2013 model for delivery before Christmas that is not DV or are those limited quantities as well?

  8. #8
    Join Date
    Apr 2012
    Location
    Washington State
    Posts
    723

    Default

    Quote Originally Posted by zedron View Post
    So would I be able to order a new 2013 model for delivery before Christmas that is not DV or are those limited quantities as well?
    You might want to get your order in quick .... judging by the interest in this model, there might be a waiting list ....
    Is it OK to want to break something just so that you can weld it back together?

    Everlast PowerTIG 185 Micro IGBT AC/DC Welder

  9. #9

    Default

    How much does 110v change the duty cycle?
    Lincoln Eagle Engine Drive
    Everlast MTS 250
    Everlast Power Tig 225lx
    HTP Mig 2400
    Everlast Power Plasma 60C --> Just need to finish my CNC Plasma Table!
    Miller Spectrum 375 Extreme Plasma cutter
    Victor cutting torch
    HF 20 Ton Shop Press
    HF 4x6 Band Saw
    HF Air Compressor
    Northern Tool Drill Press


    www.murphywelding.com

  10. #10
    Join Date
    May 2012
    Location
    Disneyland
    Posts
    2,662

    Default

    Quote Originally Posted by SeanMurphy265 View Post
    How much does 110v change the duty cycle?
    Since that's based on power and heat, I would guess that with the reduced output, it would be 100% on 120V. It would hope it has the same output as the 185 of around 95A on 120V.
    Long arc, short arc, heliarc and in-the-dark!

  11. #11

    Default

    No, it's not 100% on dual voltage due to the higher amp draw. It is about the same as the 185 on 120V, but duty cycle I am not 100% sure at this point, but it won't be 100%.

Similar Threads

  1. PowerTIG 200DX Dual Voltage Gas Inlet Fitting Size
    By MBfrontier in forum TIG Welding (GTAW/GTAW-P)
    Replies: 8
    Last Post: 09-27-2014, 12:42 AM
  2. HF Start Points Adjustment on Powertig 200DX Dual Voltage
    By MBfrontier in forum TIG Welding (GTAW/GTAW-P)
    Replies: 1
    Last Post: 02-25-2014, 03:03 PM
  3. Just received Dual Voltage 200DX TIG Welder
    By MBfrontier in forum TIG Welding (GTAW/GTAW-P)
    Replies: 6
    Last Post: 10-28-2013, 01:41 PM
  4. 2013 Powertig 200DX 200 Amp 110/220 Dual Voltage Pulse AC/DC
    By magichat in forum TIG Welding (GTAW/GTAW-P)
    Replies: 21
    Last Post: 09-23-2013, 06:22 PM
  5. 2012 Everlast PowerArc 160STH Dual voltage stick welder
    By Oleg in forum Everlast Announcements, Contests and Promotions
    Replies: 5
    Last Post: 04-26-2012, 02:57 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •