Share
Page 4 of 7 FirstFirst ... 23456 ... LastLast
Results 61 to 80 of 140

Thread: New winter time fun contest: November 19 2012- february 28 2013

  1. #61

    Default

    Quote Originally Posted by Winky View Post
    Think I’ll go ahead and make my final contest post as well … would hate to miss out because I forgot to do this … starting post 432 ending post 566
    http://www.everlastgenerators.com/fo...gory-metal-art
    http://www.everlastgenerators.com/fo...Category-tools ( see on pg2}
    http://www.everlastgenerators.com/fo...-Shop-Security

    Somehow two of my projects got mixed into the same thread to view project #2 you will have to go to the second page of it (The little steel bender that is used with a vice is project #2 not the security bars) ... it seems that project three appears on the first page of that one ????

    I have liked on facebook from previous contests and shared during this one that gives me a total of 5 entries.
    Don’t know if this will count but I’ve also shared on Twitter too.
    Sorry let me clarify

    Starting post 432 ending post 566

    My projects for the contest
    #1 http://www.everlastgenerators.com/fo...gory-metal-art
    #2 http://www.everlastgenerators.com/fo...Category-tools
    #3 http://www.everlastgenerators.com/fo...-Shop-Security
    1 video http://youtu.be/2N01D3rbgwA
    100 additional posts + 3 projects + 1 video + facebook like = 7 entries
    Last edited by Winky; 02-22-2013 at 12:49 PM.
    Powertig 200DX
    Lincoln 180c
    Hobart Handler 125
    Miller Thunderbolt
    and a bunch of other tools

  2. Default

    hard to do a project when you dont have welder i was wanting to get that 20% off on everlast products ...oh well

  3. #63

    Default

    Start post count was 601..... Ending post count is 725

    My projects for the contest:

    #1 Winter-Contest-Project-1-from-Sportbiket-Category-General-Welding-repair

    Looks like that is probably going to be the only project I get posted. I have another, but it is not finished yet and it's cold as a mofo outside. My birthday is Tuesday, maybe I'll get something that is welding related and have to run out at the last minute and try it out


    100 additional posts + 1 projects + Facebook = 3 entries
    Everlast 200DX
    Everlast PT185
    Shoptask 3-in-1 (not currently in my garage, but I own it...)

    Any day on a motorcycle like this that ends just needing parts and labor is a good day.
    4.82, 158.67mph 1/8th mile 7.350, 200.35mph 1/4 mile

  4. #64
    Join Date
    Oct 2010
    Location
    Northern Virginia
    Posts
    1,323

    Default

    Got busy recently and only gonna get busier, so I'll summarize early too.

    Starting posts: 695
    Ending posts: 817
    Like on Facebook: 1
    ...so I'm in for 2.

    Good luck, everyone, it's been fun!
    DaveO
    Oxweld oxy acet gear
    IMIG 200
    PowerTIG 210 EXT... Amazing!

  5. Default

    Quote Originally Posted by travis View Post
    hard to do a project when you dont have welder i was wanting to get that 20% off on everlast products ...oh well
    Click image for larger version. 

Name:	426530_10151264289611386_2049119157_n.jpg 
Views:	148 
Size:	8.8 KB 
ID:	9563
    this will be my smoker when done

  6. #66

    Default

    I may be away from the computer the next few days, and don't want to forget to post this wrap-up before I leave. And since I'm not going to get to my 2nd project before then, I might as well do this now. Hopefully, now that I have my feet under me, my project productivity will increase for next time!

    Starting post count was 1, ending is 105.

    I completed 1 project for the contest:
    1) Winter Contest Project 1 from MuttonHawg. Category: Custom welded Shop tools

    100 additional posts + 1 projects + Facebook 'LIKE' = 3 entries
    Everlast PowerArc 140ST

  7. Default

    Starting post count = 4
    Ending post count = 144

    Project 1: http://www.everlastgenerators.com/fo...d-improvements
    Project 2: http://www.everlastgenerators.com/fo...-Welding-Table
    Project 3: http://www.everlastgenerators.com/fo...ad-Fabrication
    Project 4: http://www.everlastgenerators.com/fo...4533#post44533

    Video post 1: http://www.everlastgenerators.com/fo...ew-1-Agent4573

    100 posts + 4 projects + 1 Video = 7 entries

    I really wish I had facebook for those "like" entries. O well.
    Poewr I-Mig 205P
    Powertig 185

  8. #68

    Default

    Starting Post Count: 126
    Ending Post Count: 240

    Project 1: http://www.everlastgenerators.com/fo...ad-Fabrication
    Project 2: http://www.everlastgenerators.com/fo...ded-Shop-tools

    Youtube Video 1: http://youtu.be/ySxRpGy7Q7I
    Youtube Video 2: http://youtu.be/2Qjh_os62gw

    Liked Facebook (Spike Roseman)
    Followed on twitter (@SpikeCustoms)
    subscribed on YouTube (iAmSimplySPiKE)

    does this make 8 entries or 10 entries (does each social media count as 1, or is it just 1 entry total for all social media follows?)
    Last edited by Spike; 02-26-2013 at 02:02 AM. Reason: bad link
    -------------------------------------------
    Spike Customs, Inc.
    Fresno, CA 93727
    ph- 559-549-RIDE(7433)
    -------------------------------------------
    -Follow me on twitter!-

  9. #69

    Default

    Ill post my current entries at this point also.

    Started at post 361 and currently have 467. I have subscribed on Facebook, Twitter and YouTube.

    So I have a total of 4 entries.
    Jason
    Everlast 255EXT - Perfection
    Everlast PowerPro 256 - UPS Demolished
    Everlast MTS200s
    12 Ton Shop Press
    DeWalt Hand Tools/ChopSaw

  10. Default

    Quote Originally Posted by agent4573 View Post
    Starting post count = 4
    Ending post count = 144

    Project 1: http://www.everlastgenerators.com/fo...d-improvements
    Project 2: http://www.everlastgenerators.com/fo...-Welding-Table
    Project 3: http://www.everlastgenerators.com/fo...ad-Fabrication
    Project 4: http://www.everlastgenerators.com/fo...4533#post44533

    Video post 1: http://www.everlastgenerators.com/fo...ew-1-Agent4573

    100 posts + 4 projects + 1 Video = 7 entries

    I really wish I had facebook for those "like" entries. O well.

    Since I'm an idiot and forgot about youtube, let me add that in...

    Starting post count = 4
    Ending post count = 144

    Project 1: http://www.everlastgenerators.com/fo...d-improvements
    Project 2: http://www.everlastgenerators.com/fo...-Welding-Table
    Project 3: http://www.everlastgenerators.com/fo...ad-Fabrication
    Project 4: http://www.everlastgenerators.com/fo...4533#post44533

    Video post 1: http://www.everlastgenerators.com/fo...ew-1-Agent4573

    100 posts + 4 projects + 1 Video + Subscribed on Youtube= 8 entries
    Poewr I-Mig 205P
    Powertig 185

  11. Default

    end of contest post
    facebook like =1
    Subscription to everlast on youtube =1
    didnt make 100 post
    i think that makes 2 entrys

  12. #72

    Default

    Quote Originally Posted by travis View Post
    end of contest post
    facebook like =1
    Subscription to everlast on youtube =1
    didnt make 100 post
    i think that makes 2 entrys
    I thought the rules were that you needed that 100 posts to even qualify for entry, so if you did not make the 100 posts, you were not in?

  13. #73

    Default

    You will need 100 posts to qualify for entry and will count as 1 entry.
    Less than 100 additional posts means you did not qualify for the contest.
    Only one project per category though to keep it fair, but a project in each category will each count as an entry, good for a total of 5 entries.
    since social media is a category only 1 like would count.
    Post any video featuring an Everlast product either as a review or with a prominent presence
    Some of the videos may not meet this requirement.

    Sorry to be the bad guy but this is from the contest rules. http://www.everlastgenerators.com/fo...9540#post39540
    Last edited by zoama; 02-27-2013 at 11:23 PM.
    2013 250EX : SSC Pedal : I-MIG 250P 20' Profax gun : Power Plasma 60 p80 torch : 3M Speedglas 9100XX : Evolution Rage 3 DB cold saw

  14. Default

    i did read that but if you dont do it all your not in anyhow so what do i have to lose

  15. #75

    Default

    Quote Originally Posted by travis View Post
    i did read that but if you dont do it all your not in anyhow so what do i have to lose
    A forum member would be in @ 1 entry with just the 100 additional posts from the start of the contest.
    2013 250EX : SSC Pedal : I-MIG 250P 20' Profax gun : Power Plasma 60 p80 torch : 3M Speedglas 9100XX : Evolution Rage 3 DB cold saw

  16. Default

    Quote Originally Posted by zoama585 View Post
    A forum member would be in @ 1 entry with just the 100 additional posts from the start of the contest.
    i got started late didnt read it all till a month ago thought i might give it a try its hard to have a project if you dont have a welder
    figgered it worth a try for 20% off

  17. #77

    Default

    ***FINAL POST***
    Post Count: Start 1 -- 104 Finish
    Project 1 - Welding Cart: http://www.everlastgenerators.com/fo...y-Welding-Cart
    Project 2 - On-Road Fabrication: http://www.everlastgenerators.com/fo...ntake-Manifold
    Facebook LIKE

    1 + 2 + 1 = TOTAL 4 ENTRIES
    2013 PT-200DX
    Ryobi Drill Press
    8" Shear
    6" Bench Grinder
    4x8 CNC Plasma Table

  18. #78

    Default

    So I'm really tired right now. I'm working off 4 hour of sleep due to working late in my shop and having to get up real early to unload my order of steel. I'm trying to read all the details of this contest and feel like I'm missing something. Doesn't help that I keep falling asleep while reading it lol.

    My question is do I qualify? I don't have 100 posts but I have two current projects posted on the forum and a boat load of videos posted on my youtube channel. I've uploaded 26 videos so far this month alone and plan on posting a few more tomorrow once I start on this next project.

    Am I to late? Do I qualify? What do I need to do to jump into this at the last damn minute?

    Here are my two current projects:

    http://www.everlastgenerators.com/fo...or-Freight-Ram

    http://www.everlastgenerators.com/fo...-Welding-Table

    Here is the link to my youtube channel:

    http://www.youtube.com/UvisionMedia

    Hell here is my facebook page that I actively use and post about my tools and projects:

    http://www.facebook.com/AlvarezMetalWorks

    I need to win one of these. I could sure use a TIG welder to show off.
    Alvarez Metal Works
    Syracuse/DeWitt, NY
    www.alvarezmetalworks.com
    www.upstate4x4.com

    *** PowerTIG 210 EXT *** PowerPlasma 50 *** I-MIG 200 ***

  19. #79

    Default

    Didn't get to do much of what I wanted to project wise.... but here are my totals:

    Starting post count = 208
    Ending post count = 310

    Project 1: http://www.everlastgenerators.com/fo...f-road-Welding

    100+ posts + 1 project + Subscribed on Youtube (gemrough is my user name) = 3 entries

    Good luck guys.
    Everlast PowerTig 200DX
    Everlast Supercut 50P
    I need a MIG.... which one to buy:
    I-Mig 160, I-Mig 200, or a MTS 160

  20. #80
    Join Date
    Nov 2012
    Location
    Cambridge, ON. CA
    Posts
    111

    Default

    Well looks like I wasn't able to do much this time around. To many things got in the way and plenty of other excuses. Hope the spring/summer contest will hold better for me. Here're my vitals.

    Start Post: 8
    End Post: 111 (assuming this post counts)

    1 Facebook share/like Dec. 2 2012, Followed on Twitter as Tanh, Liked on Youtube
    1 Project - Welding Table
    For a total of 3 entries.
    Last edited by Tanh; 02-28-2013 at 02:38 AM.
    PowerArc 140ST
    Victor VPT-100FC

Similar Threads

  1. 2013 Summer Time Contest. June 21- October 1 2013
    By performance in forum Everlast Announcements, Contests and Promotions
    Replies: 54
    Last Post: 04-12-2014, 02:42 AM
  2. Replies: 0
    Last Post: 02-25-2013, 04:11 PM
  3. Project 3 from DVA: BBQ Winter Time Fun Contest
    By DVA in forum Other Custom Fabrications
    Replies: 12
    Last Post: 02-25-2013, 04:10 AM
  4. Questions about the New winter time fun contest
    By youngnstudly in forum Everlast Announcements, Contests and Promotions
    Replies: 6
    Last Post: 02-22-2013, 05:41 PM
  5. winter time contest Q: does this count as a video for the contest?
    By Spike in forum Everlast Announcements, Contests and Promotions
    Replies: 3
    Last Post: 01-21-2013, 04:16 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •