Sign me up!
Starting post count is 910!
Sign me up!
Starting post count is 910!
PowerTig 250EX
Power I-MIG 200
Power Plasma 50
It's what you learn, After you know it all, that counts!
count me in at 117
250 ex
205 mig
milwaukee grinder
140e mig
Starting post count of 3.
Count me in. This is post number 42
Newbie welder with just a Campbell Flux Core 80 watt "hot glue" gun, for now........
Think I’ll go ahead and make my final contest post as well … would hate to miss out because I forgot to do this … starting post 432 ending post 566
http://www.everlastgenerators.com/fo...gory-metal-art
http://www.everlastgenerators.com/fo...Category-tools ( see on pg2}
http://www.everlastgenerators.com/fo...-Shop-Security
Somehow two of my projects got mixed into the same thread to view project #2 you will have to go to the second page of it (The little steel bender that is used with a vice is project #2 not the security bars) ... it seems that project three appears on the first page of that one ????
I have liked on facebook from previous contests and shared during this one that gives me a total of 5 entries.
Don’t know if this will count but I’ve also shared on Twitter too.
Last edited by Winky; 02-20-2013 at 01:52 PM.
Powertig 200DX
Lincoln 180c
Hobart Handler 125
Miller Thunderbolt
and a bunch of other tools
well i dont know how many post i have, not many , but count me in also...
I will need to edit this in, but don't want guys thinking we are changing the rules. The videos need a post here on the forum linking them to the site. I thought that might be self explanatory at the time I wrote it, but reading it in a different light and frame of mind, it may not be obvious at all.
Mark
performance@everlastwelders.com
www.everlastgenerators.com
www.everlastwelders.com
877-755-9353 x204
M-F 9am - 5pm EST
In at 413 Post.
Thurmond
Miller Bobcat 3 Phase,
Miller Suitcase X-Treme 12VS wire feeder for the Bobcat with M-25 300A .045" gun / Bernard 400A 5/64" wire mig gun .
26 series gas cooled TIG torch, setup for quick connect to Bobcat.
17 series gas cooled Tig Torch for Low Amp Solar Tig (Direct Solar Panel Powered Tig welding)
Hobart Handler 187 Mig / Fluxcore
EVERLAST PowerUltra 205P
EVERLAST PowerTig 250 EXT 2013 Model
Me too #167
Purple Fabricator 211i
I would like to enter the winter contest. I'm starting with 221 posts. Thanks.
Everlast PowerTig 250EX
Everlast PowerCool 300
Everlast PowerPlasma 70
Lincoln Powermig 215
Magnum SG Spool Gun
Don't jump on my Gomba
Ill enter. My starting count is 361. I have already "liked/subscribed" to everlast on social media for the previous contests.
Jason
Everlast 255EXT - Perfection
Everlast PowerPro 256 - UPS Demolished
Everlast MTS200s
12 Ton Shop Press
DeWalt Hand Tools/ChopSaw
Before I forget to do this..... Start post count was 910..... Ending post count is 1028
My projects for the contest:
#1 http://www.everlastgenerators.com/fo...y-Welding-Cart
#2 http://www.everlastgenerators.com/fo...tive-Metal-Art
#3 http://www.everlastgenerators.com/fo...Welding-Repair
#4 http://www.everlastgenerators.com/fo...d-improvements
#5 http://www.everlastgenerators.com/fo...f-road-Welding
100 additional posts + 5 projects = 6 entries
Last edited by zoama; 02-19-2013 at 04:32 PM. Reason: added last line as a format example
PowerTig 250EX
Power I-MIG 200
Power Plasma 50
It's what you learn, After you know it all, that counts!
id like to enter, as this would be my first post!
I'm in at 688. Good luck everyone!![]()
Is it OK to want to break something just so that you can weld it back together?
Everlast PowerTIG 185 Micro IGBT AC/DC Welder
In again at 497, which is really odd 'cuz I could have swore I broke 500 recently. Did somebody delete a thread recently?
Penncrest Buzzbox - Infinite amp control! Man the 70's were good.
Everlast Powerplasma 60 - Reliable unit, cuts well.
Everlast i-MIG 250P w/spoolgun - Really smooth, plenty of cajones.
Everlast 250EXT - Sometimes it just takes a kick in the balls...
Everlast 255EXT - Just started playing
Add me in.
Looking forward to being active on the site.
This would be #3 so far.
Last edited by willida; 12-12-2012 at 04:11 PM.
Count me in! Starting post #4. This should be fun.
Everlast Powertig 250EX
Miller Syncrowave 330 BP
Miller Dimension 302
Miller Econotig
Airco Dipstick 160
Lincoln 180HD
Purifion CT-416
I am entering with 0 posts. (first post right now!)![]()