What Torch Head?

[In Utopia]

Isn't it this one?
http://www.everlastgenerators.com/Pl...cts.php?id=128

There is a nice exploded diagram on page 18 of the manual, but maybe it would be nice to include part numbers for the parts on those pages, too.

Which manual are you referencing, I see no page 18 for a Super Cut 50P.
With the pictures furnished on this site for what's supposed to be my torch, but not looking like my torch a phone call Monday will be my next move.
I'm so easily confused sometimes.

[cbmkr]

I found the same problem with the manual, The one that comes up on the web site for a SuperCut 50P is the manual for the old Cut 50D machine ,It is the only manual that i can find for the 40 and both 50 machines.

[In Utopia]

Online PDF is also outdated.

[performance]

This is the manual for the SuperCut AND PowerPlasmas online. Not sure what is coming in the box.
http://www.everlastgenerators.com/do...Plasma%202.pdf

There isn't a brochure for the SuperCut series, other than the comparison chart which they linked from the bottom.

We are working on a long term project to update the entire site...so priority is to maintain what we have making small updates as we can.

[cbmkr]

That's what i was looking for , the one i found online was the old style manual same as came in the box, Its downloaded and saved in my system. i am going to try and find some drag tips this week.

Thanks Mark

[zoama]

That's what i was looking for , the one i found online was the old style manual same as came in the box, Its downloaded and saved in my system. i am going to try and find some drag tips this week.

Thanks Mark

You can drag the ones with the notches in the face of the tip (most common) up to 30 amp. I use a square as a guide... you just have to offset it a little from your line.

[ShaneJackson]

As far as the ceramic cups, should I go with these so I can use the spacer guides:
http://www.river-weld.com/10pcs-5060...064_p7429.html
or these:
http://www.river-weld.com/10pcs-shie...004_p7431.html

I am guessing the only difference is the groove for the spacer?