Finally had a chance to play with the remote a little more. It performs even better than I hoped for. Low amp starts are great , super soft and easy, and the fine control works great. After doing a couple of repair jobs, I did a little fooling around just for kicks. I didn't have any single edge blades around but these are .023" utility blades, and I kept the bead out on the beveled area so the thickness is quite a bit less. This was around 6 - 15 amps with a 3/32" 2% lanth, 10CFH through a #6. Just a few dabs of .040" ER70S2. Nipped a corner, but that was my unsteady hand. The new Jackson made this pretty easy, too. For a first attempt I'm ok with it.
Long arc, short arc, heliarc and in-the-dark!
Reply With Quote