Super ultra 205 power loss

[frostybrew]

It's a super ultra 205, I will go look now for a fuse, but if it's not on the outside, I think I'll wait until tomorrow when I can get a tech on the phone. Thanks for your input.

[frostybrew]

Found the problem, it was the switch, one side was bad. Duncan is sending me a new one, should be here in a couple days. Thanks everyone for your input. It's always nice to have other's experiences to draw from, also good to know there is support for any other concerns in the future.
Pat

[Rodsmachineshop]

see that happens when you buy stuff made in china , hahahahaha lol ,,, that's cool it was just the switch

[everlastsupport]

Found the problem, it was the switch, one side was bad. Duncan is sending me a new one, should be here in a couple days. Thanks everyone for your input. It's always nice to have other's experiences to draw from, also good to know there is support for any other concerns in the future.
Pat

Glad that's all it was. It is easy to replace compared to a bad MOSFET

Rod, there's not a lot not made there now days. And Duncan sells a lot of those units (he made a Canadian version) and they work very well, no AC, but awesome for the price and size. Duncan flies over and inspects the unit as well. So made in China, inspected by Canada.

[Brian Ski]

Found the problem, it was the switch, one side was bad.

Ah nice to know... So many threads on the internet about problems, then you have a similar one, stumble across the thread, and they never came back to say what the fix was.