Replacement gas nozzle

[DaveO]

I was at a supplies website the other day, and noticed they had replacement gas nozzles for the Binzel torch on the IMIG 200. The original nozzle is working fine, just wanted a spare as backup. I wasn't at home so couldn't measure or pull a part number, and wound up ordering a nozzle just a touch smaller than the original.

I'm out of town so I can't test it... what's the effect of having a slightly smaller gas nozzle?

[DaveO]

Finally a) had a chance to test this and b) remembered to do it. The answer is "no visible difference".

[johnson697]

what website did you get it from?

[DaveO]

The site is here:
http://www.weldingdepot.com/

Prices look very reasonable- the nozzle I bought was $3, for instance.

[performance]

Harbor freight and ssome tsc's have them.

[CGCINC]

Hey Dave,

Do you have a part number from that website? I need a new nozzle but they list several

[everlastsupport]

Harbor Freight has them (only ones they carry so no part number needed), like Mark mentioned. I think it is 2 for $10.

http://www.harborfreight.com/catalog...q=mig%20nozzle

Any LWS has them, just take yours in with you, they will have plenty of them

[DaveO]

At that WeldingDepot site the replacement nozzle of the same size that ships with the IMIG 200's MB15AK torch is "B1530 145.0075". That's the conical nozzle with a 12mm opening- I was guesstimating and bought the 9.5mm nozzle.

In case anyone needs it I found an exploded view of the torch here:
http://www.americantorchtip.com/cata...smID=MBICb0100

...and a catalog of parts with measurements, here:
http://binzel-abicor.com/uploads/Con...2_0-v1_web.pdf

I also found out via this web search that the US Binzel factory/office is in Frederick, MD, around the Washington DC beltway and up the highway from here... how bout that.

[CGCINC]

At that WeldingDepot site the replacement nozzle of the same size that ships with the IMIG 200's MB15AK torch is "B1530 145.0075". That's the conical nozzle with a 12mm opening- I was guesstimating and bought the 9.5mm nozzle.

In case anyone needs it I found an exploded view of the torch here:
http://www.americantorchtip.com/cata...smID=MBICb0100

...and a catalog of parts with measurements, here:
http://binzel-abicor.com/uploads/Con...2_0-v1_web.pdf

I also found out via this web search that the US Binzel factory/office is in Frederick, MD, around the Washington DC beltway and up the highway from here... how bout that.

Thank you for all that... You've been doing your homework!

[johnson697]

the ones that harborfreight carry is that the same 1 that fits on i-mig 205?my lws does not carry any binzel consumables.

[everlastsupport]

the ones that harborfreight carry is that the same 1 that fits on i-mig 205?my lws does not carry any binzel consumables.

The 205/205P and 250P use a bigger 25AK. The Harbor Freight nozzle will fit the 15AK, on the IMIG-200 only. I think someone had a thread last few weeks and found them. It is not the 24, make sure you get 25 parts.

[DaveO]

the ones that harborfreight carry is that the same 1 that fits on i-mig 205?my lws does not carry any binzel consumables.

You can use the Binzel catalog
http://binzel-abicor.com/uploads/Con...2_0-v1_web.pdf
to locate the part you need; that WeldingDepot site has 22 different Binzel nozzles, and they use the Binzel part number (from the Binzel catalog) in their order number.

[everlastsupport]

You can use the Binzel catalog
http://binzel-abicor.com/uploads/Con...2_0-v1_web.pdf
to locate the part you need; that WeldingDepot site has 22 different Binzel nozzles, and they use the Binzel part number (from the Binzel catalog) in their order number.

Dave, link is missing 404 on above.

I'll be taking in a 330 C25 tank this week for swap, I attached the 25AK nozzle (spare I have had for a couple years). I'll see what tweco or other brand will work from LWS. This one I picked up from Everlastwelders.ca (Jean) a couple years ago. She sent two, still on the first one Anti-spatter spray is key.

[DaveO]

Dave, link is missing 404 on above.

That's odd, I copied it from my own post, #8 in this thread above. The url in #8 works.

[CGCINC]

Thanks for the post DaveO, I ordered 10 new nozzles from weldingdepot.....hopefully that will last me for awhile!!