5.5" caps are the way to go since 7" electrode around here are standard. At least for us. Cut on up for the short cap if you need the headroom.
You will like the CK200 with super flex..
5.5" caps are the way to go since 7" electrode around here are standard. At least for us. Cut on up for the short cap if you need the headroom.
You will like the CK200 with super flex..
Mike R.
Email: admineverlast@everlastwelders.com
www.everlastgenerators.com
www.everlastwelders.com
877-755-9353 x203
M-F 12 - 7PM PST
FYI: PP50, PP80, IMIG-200, IMIG-250P, 210EXT and 255EXT.