Yes the Weldcraft cap is about 5.5". A comparison attached showing the 41V24 I got from WeldCity which is the same size that came on the CK200. I want an extra 5.5" cap for the CK200 for new 7" electrodes using the smaller gas lens and don't want to rework the tungsten....I just want to sharper the tip and weld...but I will check out River Welding for the longer 5.5" caps.
Millermatic 251 with 30A
Synchrowave 180
Hobart 100 MIG
lathe & RF45
Power TIG 250EX
Spectrum 625 X-TREME
Spray Zone.net-Side draft spray booth
Reply With Quote