Originally Posted by
cbmkr
Tried what you suggested, Used my New 9 Torch W/1/16" tungsten #6 nozzle gas on almost 5 lpm Amps at 80, It cleaned up pretty nice and flowed better. I had to much gas before.The tip of the tungsten point is 2.5 times the dia now .
Thanks Again
Looking good! Looks like you took in all of the recommendations on this go round. Nice to see you are making really good use of your 185 welder. It's a very capable machine.
Is it OK to want to break something just so that you can weld it back together?
Everlast PowerTIG 185 Micro IGBT AC/DC Welder
Reply With Quote