Originally Posted by
performance
If you touch the nozzle to the metal while the trigger is held, do you get sparks or an arc? Did you check the fuse?
Just to make sure that it was not the fuse, I got a replacement and tried it. Still no pilot arc or cutting arc........
I pulled the cover off of the machine. Everything inside looks good to the naked eye. No blown capacitors, no melted wires or burnt paths on any circuit boards. Slightly frustrating. This was a great little machine till now. I am sure that it is something simple, I just can not find it. Is there anything else that I can try to diagnose this??? Or is it time to call for warranty?
When opportunity knocks, most do not recognize it, because it shows up wearing overalls and looking like work!!
Joshua,Tacoma,Wa
24'x48'shop-6/2010
Hobart Handler125w/125cf 75/25-1998-Welds perfect
Power tig250EX-w/300cf argon-2/2011-had 4053 problem, fxed and good as new
Power Cool W300-4/2011-works great after making hoses
Power Plasma 50-4/2011-in for repair
Shop air
Reply With Quote