Share
Page 1 of 2 12 LastLast
Results 1 to 20 of 22

Thread: 1936 Ford Schoolbus with Cummins 5.9 NV4500

  1. #1

    Default Summer Project #1 for Tacomas747: 1936 Ford Schoolbus with Cummins 5.9 NV4500

    Well, my sister has a hairbrained idea to start a food vending business, she had thoughts of using the 'normal' step van/box truck, or maybe a shortbus. Well, we ran across this, she fell in love with it for the obvious reasons, it's COOL. Her plan (and reason for building this bus instead of a step van) is the have a 'hold' on the high-end weddings and such, to do catering to those type events, as well as car shows and the normal around-town stuff during the week. It will definetly take ALOT of work and ALOT of money, but I feel once it's done she will have a great business, as the bus is a definite eye catcher which means everyone will remember it. I think the catering at special events will be the main money maker as opposed to the day-to-day type of stuff.

    We went and picked it up on Thursday 6/24/2012, this is what it looked like when we got it:

    Click image for larger version. 

Name:	schoolbus1.jpg 
Views:	1305 
Size:	66.8 KB 
ID:	7404
    Click image for larger version. 

Name:	schoolbus2.jpg 
Views:	1210 
Size:	83.9 KB 
ID:	7405
    Click image for larger version. 

Name:	schoolbus3.jpg 
Views:	1140 
Size:	72.1 KB 
ID:	7406
    Click image for larger version. 

Name:	schoolbus4.jpg 
Views:	658 
Size:	66.4 KB 
ID:	7407
    Last edited by Tacoma747; 07-20-2012 at 04:05 AM.
    http://www.facebook.com/CBRMetalworks

    '96 Tacoma V6 on 37's, full custom, built for racin!
    Yamaha Rhino w/ 800 Rotax built for racin!
    Miller 251 MIG
    Everlast Powerplasma 60C with CNC plasma table

    Looking for sponsors for KOH 2013 race!
    Racin' Tacoma Build Thread

  2. #2
    Join Date
    Apr 2012
    Location
    Washington State
    Posts
    723

    Default

    Certainly a very unique shape. Quite an eye catcher. Then I saw the pic of the inside ... At least you won't have to worry about stripping things out to make room for stuff!
    Is it OK to want to break something just so that you can weld it back together?

    Everlast PowerTIG 185 Micro IGBT AC/DC Welder

  3. #3

    Default

    I hope you are going to paint it!!!

    BTW how is the engine??? I see you mentioned pick it up. Not drivable yet??? or is it??? Any pics of the engine???
    Shade tree MIG welder.
    Now a Shade tree TIG welder.

  4. #4

    Default

    It actually had a 460 and C6 sitting in it when we got it, i didn't figure that would be a very good combination for towing this much weight all the time. We pulled the motor out of a 91' D350, and the trans out of a 2001 3500. Here they are bolted in. The bus has come a LONG way in a short time, hopefully it will be ready to be blasted in a few weeks. I am still in the process of frame modifications/repairs and some rust repair before we take it to be blasted.


    Click image for larger version. 

Name:	2012-07-17_17-04-03_840.jpg 
Views:	564 
Size:	149.1 KB 
ID:	7412
    Click image for larger version. 

Name:	2012-07-17_17-01-50_470.jpg 
Views:	565 
Size:	152.0 KB 
ID:	7413
    http://www.facebook.com/CBRMetalworks

    '96 Tacoma V6 on 37's, full custom, built for racin!
    Yamaha Rhino w/ 800 Rotax built for racin!
    Miller 251 MIG
    Everlast Powerplasma 60C with CNC plasma table

    Looking for sponsors for KOH 2013 race!
    Racin' Tacoma Build Thread

  5. #5

    Default

    Wow you guys take on some pretty big projects... It would take me forever to finish something like that. I guess I have a lot going on around here. A whole lot of smaller projects.
    Shade tree MIG welder.
    Now a Shade tree TIG welder.

  6. #6

    Default

    I would put an LS motor in that bad boy, but it would probably be better suited for a diesel.
    John Force had a school bus that Chip Foose did on Overhaulin
    http://www.johnforceracing.com/index-2.htm
    Lincoln Eagle Engine Drive
    Everlast MTS 250
    Everlast Power Tig 225lx
    HTP Mig 2400
    Everlast Power Plasma 60C --> Just need to finish my CNC Plasma Table!
    Miller Spectrum 375 Extreme Plasma cutter
    Victor cutting torch
    HF 20 Ton Shop Press
    HF 4x6 Band Saw
    HF Air Compressor
    Northern Tool Drill Press


    www.murphywelding.com

  7. #7

    Default

    Quote Originally Posted by SeanMurphy265 View Post
    I would put an LS motor in that bad boy, but it would probably be better suited for a diesel.
    John Force had a school bus that Chip Foose did on Overhaulin
    http://www.johnforceracing.com/index-2.htm
    I'd hate to see how much of a turd this thing would be (and how horrible the fuel mileage would be) with an LS in it. That's why we ditched the 460/C6 right off the bat, with the weight it would be pulling, there is no way any gas engine would get better than 10mpg (the 460 would probably get about 5, haha). I am going to guess this thing will weigh over 10K pretty easily. An Excursion weighs about 8,500lbs, with equipment/generator/ac unit/h20 tanks and such the bus might be pushing 12-13K.

    I am HOPING for ~15mpg on the highway with the cummins, just depends how fast it needs to get there, I think the rear axle ratio is 4.56 so that's not gonna help mileage.

    Anyways, got a alot done today, I'll try and get pics posted up soon. I decided to cut the frame out in the back and rework it with 2x6 .250 tubing, I got one framerail in today and it looks MUCH better than the mess that was in it. I am also ditching the dumptruck leaf springs for some Dodge 3500 springs that will hopefully ride better (assuming the dumptruck springs would ride like crap)
    http://www.facebook.com/CBRMetalworks

    '96 Tacoma V6 on 37's, full custom, built for racin!
    Yamaha Rhino w/ 800 Rotax built for racin!
    Miller 251 MIG
    Everlast Powerplasma 60C with CNC plasma table

    Looking for sponsors for KOH 2013 race!
    Racin' Tacoma Build Thread

  8. #8

    Default

    My old 86 Chevy 1 ton flatbed with the big block Chevy got like 10 to 11 mpg if lucky pulled it out and tossed it and installed a 383 stroker small block Chevy truck now gets 17 to 19 mpg cruising at 70 mph it rated at 14000 lbs Click image for larger version. 

Name:	86 truck 001.jpg 
Views:	545 
Size:	145.3 KB 
ID:	7416 I call my truck the beast lol
    EVERLAST 250 EX , EVERLAST I-MIG 205 , EVERLAST spool gun NOW have 2 EVERLAST POWER PLASMA 50 plasma cutter's , LINCOLN 175HD MIG WELDER , VICTOR TORCH SET and many more tools to many to list

  9. #9

    Default

    grabs some springs off a commercial frame gm truck they ride niceClick image for larger version. 

Name:	86 truck 002.jpg 
Views:	446 
Size:	143.3 KB 
ID:	7417 with or with out a load
    EVERLAST 250 EX , EVERLAST I-MIG 205 , EVERLAST spool gun NOW have 2 EVERLAST POWER PLASMA 50 plasma cutter's , LINCOLN 175HD MIG WELDER , VICTOR TORCH SET and many more tools to many to list

  10. #10
    Join Date
    May 2012
    Location
    Disneyland
    Posts
    2,662

    Default

    Another option, since you're starting from scratch, is to go air ride. Always the best ride no matter what the load. Now that lots of motorhomes use them from the factory, there are a lot more options for smaller than class 7/8 trucks.
    Long arc, short arc, heliarc and in-the-dark!

  11. #11

    Default

    have a friend that just installed a full air ride kit on his dodge dully it rides so nice and has on board adjustment for different loads , he wish he had installed the kit years ago
    EVERLAST 250 EX , EVERLAST I-MIG 205 , EVERLAST spool gun NOW have 2 EVERLAST POWER PLASMA 50 plasma cutter's , LINCOLN 175HD MIG WELDER , VICTOR TORCH SET and many more tools to many to list

  12. #12

    Default

    What color are you going with? Are there any laws that will restrict you from painting it yellow. Some state will not allow it, or at least it was like that here.
    Mike R.
    Email: admineverlast@everlastwelders.com
    www.everlastgenerators.com
    www.everlastwelders.com
    877-755-9353 x203
    M-F 12 - 7PM PST
    FYI: PP50, PP80, IMIG-200, IMIG-250P, 210EXT and 255EXT.

  13. #13

    Default

    I bought a full air-ride kit off an F-350 (Talon kit) for $500, thought about using it, but the very narrow width of the rear axle makes for a tough fit. I would have to narrow the spring perches (they are already pretty narrow), plus I would need to narrow the frame even more. As much as I'd like to make the Talon kit work it just isn't feasible. I know she wouldn't be willing to spend a chunk of change to buy an air-ride setup, the $500 kit I bought will probably end up going in an Excursion for myself.

    Mike, as for the paint, it will be painted a brown color on the bottom, and creme on the roof/top, at least thats the plan right now.
    http://www.facebook.com/CBRMetalworks

    '96 Tacoma V6 on 37's, full custom, built for racin!
    Yamaha Rhino w/ 800 Rotax built for racin!
    Miller 251 MIG
    Everlast Powerplasma 60C with CNC plasma table

    Looking for sponsors for KOH 2013 race!
    Racin' Tacoma Build Thread

  14. #14

    Default

    Man, that bus is Bad A$$!!! I love it!
    I can see it now painted bright yellow, flashing lights all over it with chrome wheels slammed on the ground and in a Rap video!!

    But seriously, I love the look of that thing and it would make a great car show project!!
    PowerTig 250EX
    Power I-MIG 200
    Power Plasma 50
    It's what you learn, After you know it all, that counts!

  15. #15

    Default

    As usual I have become slack on posting pictures. Check in at THIS LINK for more pictures.

    Also, be sure to 'like' my facebook page for picture updates.
    http://www.facebook.com/CBRMetalworks

    '96 Tacoma V6 on 37's, full custom, built for racin!
    Yamaha Rhino w/ 800 Rotax built for racin!
    Miller 251 MIG
    Everlast Powerplasma 60C with CNC plasma table

    Looking for sponsors for KOH 2013 race!
    Racin' Tacoma Build Thread

  16. Default

    I know this thread is a year old, but I'd be interesting in seeing how it's going, or how it turned out.

  17. #17

    Default

    Quote Originally Posted by jameslo View Post
    I know this thread is a year old, but I'd be interesting in seeing how it's going, or how it turned out.
    The OP hasn't been here in eight months and left links to the continuation of his project in the post above yours.
    2013 250EX : SSC Pedal : I-MIG 250P 20' Profax gun : Power Plasma 60 p80 torch : 3M Speedglas 9100XX : Evolution Rage 3 DB cold saw

  18. Default

    Quote Originally Posted by zoama585 View Post
    The OP hasn't been here in eight months and left links to the continuation of his project in the post above yours.
    I was hoping he was still around. I'm a proud FaceBook non-participant. Odd, I guess, in that I'm an IT manager. But FaceBook doesn;t solve any problems I have

  19. #19

    Default

    Quote Originally Posted by jameslo View Post
    I was hoping he was still around. I'm a proud FaceBook non-participant. Odd, I guess, in that I'm an IT manager. But FaceBook doesn;t solve any problems I have
    In his post, not his sig http://www.nc4x4.com/forum/index.php...ummins.123342/ His last update was in June.
    There's plenty of time left to reach the 100 post contest requirement.
    2013 250EX : SSC Pedal : I-MIG 250P 20' Profax gun : Power Plasma 60 p80 torch : 3M Speedglas 9100XX : Evolution Rage 3 DB cold saw

  20. Default

    Yeah, I saw that, but it didn't look like there was a lot done on it. I'm an "old car" guy is the interest. I have a '31 Ford I mess with. More than I should. But that bus looked pretty cool.

Similar Threads

  1. Cummins turbo mount
    By dzljon in forum TIG Welding (GTAW/GTAW-P)
    Replies: 34
    Last Post: 10-28-2017, 08:03 PM
  2. 4bt Cummins motor mounts
    By dzljon in forum Other Custom Fabrications
    Replies: 12
    Last Post: 08-31-2016, 07:14 AM
  3. Cummins exhaust manifold cut to fit
    By dzljon in forum TIG Welding (GTAW/GTAW-P)
    Replies: 13
    Last Post: 11-19-2014, 09:56 PM
  4. Ford F150 vs mice!
    By welderdude in forum Truck, Car and Bike builds
    Replies: 26
    Last Post: 05-13-2012, 09:49 PM
  5. Ford Bronco rock crawler
    By ScratchStart in forum Off Road Fabrication
    Replies: 16
    Last Post: 04-29-2011, 08:05 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •