Dimensions

[performance]

Brochures are linked into the details page on each individual unit...Somewhere around the price.

[DaveO]

PowerTIG 200DX: 9”Wx24”Lx17”H

[Rambozo]

Brochures are linked into the details page on each individual unit...Somewhere around the price.

Some have a downloadable specs sheet, but they only repeat what is on the website, and do not include the dimensions. Usually just electrical specs.

[X83]

Not sure how accurate these measurements are but found a few in the service manuals and specifications pdf links.

PowerCool W300 = 17.7Lx9.8Wx14.0H in. (450x250x355mm)

PowerI-Tig 200 = 16.7Lx7.7Wx12.5H in (425×195×310mm)

PowerI-Tig 250 = 16.7Lx7.7Wx12.5H in. (425×195×310mm)

PowerTig200DX = 20.2Lx8.6Wx15.5H in. (515x220x395mm)

PowerTig250DX = 20.2Lx8.6Wx15.5H in. (515x220x395mm)

PowerTig200LX = 20.2Lx8.6Wx15.5H in. (515x220x395mm)

PowerTig250LX = 20.2Lx8.6Wx15.5H in. (515x220x395mm)

PowerTig200EX = 20.2Lx8.6Wx15.5H in. (515x220x395mm)

PowerTig250EX = 20.2Lx8.6Wx15.5H in. (515x220x395mm)

PowerTig315DX = 20.2Lx8.6Wx15.5H in. (515x220x395mm)

PowerTig 210EXT = 19.3Lx9.5Wx18.5H in. (490x240x470mm)

PowerTig 250EXT = 27.6Lx13.4Wx26.8H in. (700x340x680mm)

PowerTig 315EXT = 27.6Lx13.4Wx26.8H in. (700x340x680mm)

Power I-Mig 160 = 16Lx7.5Wx15H in. (405x190x380mm)

Power I-Mig 200 = 16Lx7.5Wx15H in. (405x190x380mm)

Power I-Mig 205 = 20Lx12.5Wx13.5H in. (510x320x345mm)

Power I-Mig 205P = 20Lx12.5Wx13.5H in (510x320x345mm)

Power I-Mig 250P = 31Lx19Wx29H in. (785x480x735mm)

PowerMaster205 = 16.9Lx7.9Hx11.4W in.(430x200x290 mm)

PowerMaster226 = 16.9Lx7.9Hx11.4W in.(430x200x290 mm)

PowerUltra 164 =

PowerUltra 185 =

PowerUltra 205 = 16.9x8.3x12.2in. (430×210×310mm)

PowerUltra 205P = 16.9x8.3x12.2in. (430×210×310mm)

PowerPro 164 =

PowerPro 205 =

PowerPro 256 =

MTS 160 =

MTS 200S =

[NRM]

X83 That is awesome finally the dimensions all in one place. I have the Power Pro 205 and the dimensions (inches) are 24Lx16.5Hx9W, the 24L includes the pressure regulator/water trap.

[Rambozo]

Thanks, I was looking through some of that material. When I compared specs in the manuals I could tell some were older models and not correct. For example for The Power I-Tig 200 I can find different dimensions depending on where I look. 17x8x12.5 in seems to be the older model while 9”Wx24”Lx17”H is shown with what looks like the newer photograph. Then everyone has their own method of measuring and rounding. Even the metric-english conversions have significant rounding errors or something. It all depends on the units used to measure and how it was converted. Because of rounded cases, handles, knobs, etc. it would be nice if there was a standard way to measure and a common level of precision. For most things like this I would say give the overall dimensions of a box that will contain the unit without any plugs or attachments, but including all handles, feet, and knobs. Precision should probably be .1" or 2 mm or better. Like fdcmiami said, being able to find out if something will fit where you intend to put it is kinda a big deal. It's not like people can walk into a showroom and measure one of these. From what I understand there was a list at one time but due to a computer crash it was lost.

Backups are not optional. It's not if a hard drive will fail, it's when!


MTS 400 25.6x25.5x11.5" (576x574x297mm)

[everlastsupport]

We can keep adding to the list X83 took the time to make up (thanks), and make corrections if needed. PM me any changes rather posting so we keep this as the end. We can move it later to tech bulletins or someplace and sticky it.

I corrected the 205P, added 4 missing ones (140STH, Power Plasmas, etc). We need Power Plasma 50 in there. Also, took a couple other individuals posts and moved their numbers here.

PowerCool W300 = 17.7Lx9.8Wx14.0H in. (450x250x355mm)

Power Plasma 50 = 12.5"H 7.5"w 17"L to the end of the hose barb
Power Plasma 60-80 = 17"H x 9"W x 21"D (hand measured)

Power ARC 140 = 9.5"H x 5.125"W x 11.625"D
Power ARC 160STH = 12"H x 12"D x 6.5"W (hand measured)
Power ARC 200 =
Power ARC 300 = 21.5L x 9W x 18H

Power I-Tig 200 = 16.7Lx7.7Wx12.5H in (425×195×310mm)
Power I-Tig 250 = 16.7Lx7.7Wx12.5H in. (425×195×310mm)
Power Tig200DX = 20.2Lx8.6Wx15.5H in. (515x220x395mm)
Power Tig250DX = 20.2Lx8.6Wx15.5H in. (515x220x395mm)
Power Tig200LX = 20.2Lx8.6Wx15.5H in. (515x220x395mm)
Power Tig250LX = 20.2Lx8.6Wx15.5H in. (515x220x395mm)
Power Tig200EX = 20.2Lx8.6Wx15.5H in. (515x220x395mm)
Power Tig250EX = 20.2Lx8.6Wx15.5H in. (515x220x395mm)
Power Tig315DX = 20.2Lx8.6Wx15.5H in. (515x220x395mm)

Power Tig 210EXT = 19.3Lx9.5Wx18.5H in. (490x240x470mm) (mine, with my tape is 8.5"W x 16"H x 18"D )
Power Tig 255EXT = 22L x 9.W x 17H in.
Power Tig 315EXT = 27.6Lx13.4Wx26.8H in. (700x340x680mm)

Power I-Mig 160 = 16Lx7.5Wx15H in. (405x190x380mm)
Power I-Mig 200 = 16Lx7.5Wx15H in. (405x190x380mm) I got 8"W x 15.5"H 16.25"D (hand measure)
Power I-Mig 205 = 20Lx12.5Wx13.5H in. (510x320x345mm)
Power I-Mig 205P = 21"H x 20"D x 9.25W
Power I-Mig 250P = 31Lx19Wx29H in. (785x480x735mm)

PowerMaster205 = 16.9Lx7.9Hx11.4W in.(430x200x290 mm)
PowerMaster226 = 16.9Lx7.9Hx11.4W in.(430x200x290 mm)

PowerUltra 164 =
PowerUltra 185 =
PowerUltra 205 = 16.9x8.3x12.2in. (430×210×310mm)
PowerUltra 205P = 16.9x8.3x12.2in. (430×210×310mm)

PowerPro 164 =
PowerPro 205 = 24Lx16.5Hx9W (24L is with pressure reg)
PowerPro 256 = 24Lx16.5Hx9W (24L is with pressure reg)

MTS 160 =
MTS 200S =
MTS 400 = 25.6x25.5x11.5" (576x574x297mm)