A81 Torch Damage

[everlastsupport]

Mark's pick will not let you down. Rod's is a tad better for a few bucks more. I have one of the ones Mark recommends as well and they will get the job done and on 110VAC, they are great and cheap.

But if spending new money and $50 more will get a fair bit more. I would go Rod's way.

Look on Craigslist and see if there is an 80 gallon "on the cheap" first.

The one Mark mentioned will get everything done for you.

[Rectified]

I think I will go with the lowes. That is a great deal. Wiring another 240v circuit isnt a problem, I did the one for the welder in a couple of hours. Thanks again.

Mark's pick will not let you down. Rod's is a tad better for a few bucks more. I have one of the ones Mark recommends as well and they will get the job done and on 110VAC, they are great and cheap.

But if spending new money and $50 more will get a fair bit more. I would go Rod's way.

Look on Craigslist and see if there is an 80 gallon "on the cheap" first.

The one Mark mentioned will get everything done for you.

[Rectified]

That is a great deal thanks for posting it.

for a couple of bucks more can get this one from lows http://www.lowes.com/pd_54284-1126-V...roduct_price|1 plus has a 3 year warranty the sears only has a 1 year warranty

[Rodsmachineshop]

thing too 240v motors last longer than 120 v plus have enough air for power air tools . I have a 120 v but it just for a back up air compressor if my big one brakes