It looks like your running too hot. You want to cut the metal and not melt it away. You probably could cut that material around 30 amps. I think 50psi is what I run.
Senior Member
It looks like your running too hot. You want to cut the metal and not melt it away. You probably could cut that material around 30 amps. I think 50psi is what I run.
Lincoln Eagle Engine Drive
Everlast MTS 250
Everlast Power Tig 225lx
HTP Mig 2400
Everlast Power Plasma 60C --> Just need to finish my CNC Plasma Table!
Miller Spectrum 375 Extreme Plasma cutter
Victor cutting torch
HF 20 Ton Shop Press
HF 4x6 Band Saw
HF Air Compressor
Northern Tool Drill Press
www.murphywelding.com
Posting Permissions
Reply With Quote